Board index General Technical Support PowerPuck/Extreme PowerPuck CAT 3126b and M2000

CAT 3126b and M2000

PowerPuck/Extreme PowerPuck Support

Moderator: mikel

Post Thu Sep 06, 2012 6:13 pm

Posts: 2
I just received my replacement M2000 for my Cat 3126b. The first one caused a check engine light, and the engine ran poorly. The replacement has exactly the same failure as the first. The voltage from pin 5 of the puck at just key on should be about 0.2v, and both pucks output 6.67 volts, with or without the adjustment pot, and with the pot in changing the power setting does not change the puck output. This is the ICP output to the ECU. Waiting for a reply for my next step.

Post Fri Sep 07, 2012 10:15 am

Posts: 53948
Location: DiabloSport World Headquarters

checking with our puck engineers...
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Thu Sep 13, 2012 8:32 pm

Posts: 2
This is John Thomas checking back in. Have you heard anything from your engineers about the M2000 and CAT 3126b ICP voltage?
Thanks
Stillwater.john@gmail.com


Return to PowerPuck/Extreme PowerPuck