no go wot!
Moderator: mikel
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
no go wot!
I have a 2013 gmc 6.6l duramax with the p2040 extreme power puck. with the knob turned to the max I am getting 2-3mpg better, but If I go wot in any gear past 2nd it seems to stall and power is cut. I can let off to 50-60% and it will pull again. I called the tech department today and the guy had no idea what he was doing! I think he was the floor technician! I have the fass 150 on the truck and it still is not running correctly. Please give me some ideas!
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: no go wot!
did you install the fuel rail shim kit?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
No sir, What is this? Where do I get it? What will it do? Thank you.mikel wrote:did you install the fuel rail shim kit?
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
mikel wrote:did you install the fuel rail shim kit?
I can't seem to find a shim kit for an lml. can you help please
Re: no go wot!
Just out of curiosity are you getting any indicator lights? I'm wondering if maybe you are limping it.
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: no go wot!
its a stack of 3 washers placed behind the pressure relief valve to increase its holding pressure....the instructions are shown inthe manual.herationkane wrote:mikel wrote:did you install the fuel rail shim kit?
I can't seem to find a shim kit for an lml. can you help please
If you didnt get the shims inthe box, please email me your name and address so I can get it out to you.
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
I did not receive the shim kit.
Last edited by herationkane on Tue Mar 07, 2023 8:39 am, edited 1 time in total.
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
It does not have any lights or codes. When I go full throttle it just feels like it is stalling. It actually feels and sounds like its hitting the rev limiter and when I let off some it will start to pull like it should.BigDeez wrote:Just out of curiosity are you getting any indicator lights? I'm wondering if maybe you are limping it.
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
Tonight I made 2 passes against my buddies Pontiac g8 and from start to close to 1/8 mile it pulled very hard then started acting up. On the second pass same thing then a light came on. It said low fuel pressure and lost com with glo plug module.BigDeez wrote:Just out of curiosity are you getting any indicator lights? I'm wondering if maybe you are limping it.
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
herationkane wrote:I did not receive the shim kit.
Hello mikel
Last edited by herationkane on Tue Mar 07, 2023 8:40 am, edited 1 time in total.
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: no go wot!
Sorry, I was out of the office Friday, I got the info over to our guys today.
Thanks
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
I received the shim kit but on previous models the relief plug is in the end of the rail where the lml just has a sensor that cant be shimmed.
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
mikel, can you please find out how to make this work on an lml?
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: no go wot!
sounds like the fuel system simply cant keep up, or its dumping fuel pressure which is what the shim kit would have been for....let me investigate.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
-
- Posts: 13
- Joined: Sun Apr 04, 2010 9:39 am
Re: no go wot!
Did you find a way to make this work for me?mikel wrote:sounds like the fuel system simply cant keep up, or its dumping fuel pressure which is what the shim kit would have been for....let me investigate.