Extreme power puck throwing p0102

PowerPuck/Extreme PowerPuck Support

Moderator: mikel

Post Reply
mxtime
Posts: 8
Joined: Fri Oct 19, 2007 3:52 am

Extreme power puck throwing p0102

Post by mxtime »

2008 lmm duramax
Fully installed and shimmed also.
Throws P0102 code when I get on it hard and have the knob turned up more than ~30%.
Fuel pressure drops to 10000k.
Also boost on my electronic boost guage goes down to 20psi from 25psi on max effort when I hve the knob turned all the way up..
Is this because of the boost fooler?
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Extreme power puck throwing p0102

Post by mikel »

the fuel pressure sounds like the shim is not allowing it to hold pressure.

the boost is a result of the boost fooling, yes.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
mxtime
Posts: 8
Joined: Fri Oct 19, 2007 3:52 am

Re: Extreme power puck throwing p0102

Post by mxtime »

Thanks for the reply Mike.
I put three shims in so I don't think it's that. I think it may be dropping the rail pressure after the MAF code/error maybe?
mxtime
Posts: 8
Joined: Fri Oct 19, 2007 3:52 am

Re: Extreme power puck throwing p0102

Post by mxtime »

Does the puck "fool" the rail pressure in the same sense as it fools the boost? Meaning does it show lower rail pressure on an electronic guage when the knob is cranked?
mxtime
Posts: 8
Joined: Fri Oct 19, 2007 3:52 am

Re: Extreme power puck throwing p0102

Post by mxtime »

Follow up.
It was my fuel filter causing the drop in rail pressure. Had it replaced and all is good there.
Still have code P0102 though
Post Reply