Board index General Technical Support MAF.i.a Another "do I need a MAFia" thread

Another "do I need a MAFia" thread

MAF.i.a Support

Moderator: mikel

Post Mon Jun 28, 2010 12:51 pm

Posts: 1
I have a 2010 shelby gt500 with :

Upper pulley, +10% lower pulley, offroad xpipe and a dyno tune. Car put down just under 600rwhp/tq with 15lbs boost

Do I need a MAFia now, or would that be something that will benefit me once I put on a larger/twin screw blower?

I have an SCT handheld programmer, does it read the voltage to your knowledge of the MAF? or do I have to get in there with a voltage meter to check?

Post Mon Jun 28, 2010 1:01 pm

Posts: 53704
Location: DiabloSport World Headquarters

You should be able to log MAF_V to see how close to 5V you are now.

My understanding is that a GT500 with stock intake and pulley will need a Mafia, and with a CAI you get a little more breathing room.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Return to MAF.i.a