I have a 2010 shelby gt500 with :
Upper pulley, +10% lower pulley, offroad xpipe and a dyno tune. Car put down just under 600rwhp/tq with 15lbs boost
Do I need a MAFia now, or would that be something that will benefit me once I put on a larger/twin screw blower?
I have an SCT handheld programmer, does it read the voltage to your knowledge of the MAF? or do I have to get in there with a voltage meter to check?
Another "do I need a MAFia" thread
Moderator: mikel
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Another "do I need a MAFia" thread
You should be able to log MAF_V to see how close to 5V you are now.
My understanding is that a GT500 with stock intake and pulley will need a Mafia, and with a CAI you get a little more breathing room.
My understanding is that a GT500 with stock intake and pulley will need a Mafia, and with a CAI you get a little more breathing room.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com