Board index General Technical Support MAF.i.a MAF voltage and load values spike down at 5600 RPM.

MAF voltage and load values spike down at 5600 RPM.

MAF.i.a Support

Moderator: mikel


Posts: 4
The car in question is a 2001 Cobra with a MAFIA set at position 2 and connected to a 90MM Ford lighting MAF. The issue at hand is that the A/F under load goes lean and the car pings at throttle tip in past 3500RPM's. Second, the A/F ratio varies from 11:1 to 18:00 under part throttle, deceleration and non boost conditions.

In an attempt to resolve the pinging and A/F fluctuations, I logged the following values: Maf, load and RPM and got this:

[Load] [MAF] [RPM]
90.1% 3.63Volts 4758RPM
97.3% 3.80Volts 5193RPM
101.3% 3.80 Volts 5690RPM
81.2% 1.99 Volts 5690RPM
14.9% 1.61 volts 5281RPM





Could a defective Mafia cause this?
2001 Ford SVT cobra.

Mods: bicycle rack
Image


Posts: 53704
Location: DiabloSport World Headquarters

Yeah, Id say a bad mafia could cause this, easy enough to find out by removing it.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Return to MAF.i.a