Board index General Technical Support CMR Support VE Table threshold

VE Table threshold

CMR Support

Moderator: mikel

Post Fri Oct 30, 2015 1:47 pm

Posts: 86
Is there any way you guys can raise the VE Table Threshold from clipping at 1.25? MAX VE value in the software doesn't seem to do anything. We are tuning modern HEMIs.
2007 Jeep GCSRT8 Turbo 8.30@167

Post Fri Oct 30, 2015 2:34 pm

Posts: 53289
Location: DiabloSport World Headquarters

Well....ideally disabling ANN/using VE is not really the best way to approach fueling on these applications, do you have access to the CMR dealer forums below Harry?
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Nov 09, 2015 10:42 am

Posts: 86
No I don't. Also, have another question.... I'm using a RacePak now to do my datalogging. I am monitoring individual cylinder EGT's. Is there anyway possible that you guys can allow us to tune individual injectors? I'm seeing about a 120* difference in cylinder 2 vs 6 and 8. My custom manifold is backwards by the way. I did run a 8.86@164 this weekend peddling it. :-) All tuned using Diablo CMR. Woot Woot.
2007 Jeep GCSRT8 Turbo 8.30@167

Post Mon Nov 09, 2015 2:00 pm

Posts: 53289
Location: DiabloSport World Headquarters

I dont know about individual injector control, thats up to Chrysler, and I dont know that such control exists in the PCM ;)

Who is doing your CMR stuff?
Their log in allows access to the cmr dealer forums....
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Return to CMR Support