Hi there,
i am new in this Forum. Apologize for stupid questions and poor English. (I am German)
I bought my 2008 Chrysler 300 SRT8 here in the UK. The Dealer got the car in exchange to a new one.
It is in a very good shape and had cold Air Intake and a Magnaflow Exhaust .
It comes with a Dyno Print Out which says 460 HP. It drives very well.
In the Paperwork it comes up that this tune was done with a Diablosport Equipment.
I do not have this equipment so i am thinking to get a T1000 to play with.
Is it a problem to connect a new T1000 to the car which has already a Diablo Tune?
What will happen when the battery get disconnected ? The car goes soon to a Main dealer to fix an issue with the Airbag. (Manufacture Recall)
Thanks for reading and maybe some answers
Bought a tuned 300 SRT8. Can i use a new Diablo to connect?
- Chrysler300SRT8UK
- Posts: 4
- Joined: Sun Jul 30, 2017 4:17 am
- Location: United Kingdom
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Bought a tuned 300 SRT8. Can i use a new Diablo to conne
if you try to use a new tuner it will prompt you to get the vehicle back to stock before it tries to do anything.
If it makes 460 rwhp it muct be modified, and likely has a custom tune. I would honestly suggest leaving it alone as it is.
The tune will not change from a battery reset.
Thanks
If it makes 460 rwhp it muct be modified, and likely has a custom tune. I would honestly suggest leaving it alone as it is.
The tune will not change from a battery reset.
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
- Chrysler300SRT8UK
- Posts: 4
- Joined: Sun Jul 30, 2017 4:17 am
- Location: United Kingdom
Re: Bought a tuned 300 SRT8. Can i use a new Diablo to conne
Hi Mikel,
thanks for your answer.
The Print out from the Dyno says 460 engine HP not RW HP. Just want to be honest and stay with the facts.
So i agree that there must be a tune on it but i think it should have a bit more.
Thats why i ask.
Can the new Trinity bring the ecu back to stock or do i have to go to a main dealer to do that?
Thank you for your support mikel
thanks for your answer.
The Print out from the Dyno says 460 engine HP not RW HP. Just want to be honest and stay with the facts.
So i agree that there must be a tune on it but i think it should have a bit more.
Thats why i ask.
Can the new Trinity bring the ecu back to stock or do i have to go to a main dealer to do that?
Thank you for your support mikel
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Bought a tuned 300 SRT8. Can i use a new Diablo to conne
we can force the trinity t bring it back to stock, but if there is a custom tune there now it will be lost in that process.
Dybnos dont measure engine power, so no clue how they came up with that number
Dybnos dont measure engine power, so no clue how they came up with that number
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
- Chrysler300SRT8UK
- Posts: 4
- Joined: Sun Jul 30, 2017 4:17 am
- Location: United Kingdom
Re: Bought a tuned 300 SRT8. Can i use a new Diablo to conne
Good question,
i will check the print out again and will posted here.
Maybe they add the 15% gerabox loss on top of the RWHP and come up with that number?
Anyway we will see.
Thanks again for your reply
i will check the print out again and will posted here.
Maybe they add the 15% gerabox loss on top of the RWHP and come up with that number?
Anyway we will see.
Thanks again for your reply
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Bought a tuned 300 SRT8. Can i use a new Diablo to conne
if they are adding made up numbers to get a made up flywheel number, the whole dyno session was a waste of time
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
- Chrysler300SRT8UK
- Posts: 4
- Joined: Sun Jul 30, 2017 4:17 am
- Location: United Kingdom
Re: Bought a tuned 300 SRT8. Can i use a new Diablo to conne
Hi Mikel,
dont know if they made it up.
Looks for me ok.
Maybe they do it different in Uk
They measure the RWHP but also give a crank HP.
The Crank one will be calculated by the system i guess.
Just one question. It is not possible to "read out" the map from the ECU and store it in the Trinity?
Nice support by the way. Not normal these days.
Thanks
Jorg
dont know if they made it up.
Looks for me ok.
Maybe they do it different in Uk
They measure the RWHP but also give a crank HP.
The Crank one will be calculated by the system i guess.
Just one question. It is not possible to "read out" the map from the ECU and store it in the Trinity?
Nice support by the way. Not normal these days.
Thanks
Jorg
- Attachments
-
- Dynamometer Report 300c SRT8.jpeg (2.43 MiB) Viewed 15048 times
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Bought a tuned 300 SRT8. Can i use a new Diablo to conne
Unfortunately no, the device will not save a previous tune as a backup file.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com