Wanted to share this...
2014 Challenger R/T
Mods:
Catback Flowmaster
93 Octane custom tune.
I uploaded the CVS file from my DiabloSport Log and uploaded it to TT Dyno software and here are the results.
274 HP at 5600 RPM
286 Torque at 4400 RPM
I noticed some knock at WOT
Not satisfied. I was hoping for more..
I will be re-loading a custom tune 91 Octane and compare the results.
Challenger R/T using TT Dyno Software
Moderator: mikel
-
- Posts: 103
- Joined: Tue Dec 03, 2013 2:27 pm
Challenger R/T using TT Dyno Software
- Attachments
-
- LOG_2_93OCTANE.LOG
- DiabloSport Log file: street and freeway run.
- (534.61 KiB) Downloaded 850 times
-
- 2014 Challenger R/T
- TT Dyno.jpg (150.93 KiB) Viewed 18559 times
Re: Challenger R/T using TT Dyno Software
that TT Dyno software is not really accurate haha. .I know what you're talking about, I tried it out years ago...
you're better off using Torque Pro app for your cell phone....
you're better off using Torque Pro app for your cell phone....
06MonteSS / DiabLew Tune
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
Re: Challenger R/T using TT Dyno Software
TTDyno is about 5% below a chassis dyno. I've used it multiple times and have actually dynoed the vehicles.
I still hate Torque. Its interface is horrible. It doesn't log properly. And its Android only, so I gotta drag out the Nexus. 3 strikes, they're out.
I still hate Torque. Its interface is horrible. It doesn't log properly. And its Android only, so I gotta drag out the Nexus. 3 strikes, they're out.
2021 BMW M550i xDrive
BMC Drop ins, JB4
2010 Nissan Murano beater
K&N Drop-in
BMC Drop ins, JB4
2010 Nissan Murano beater
K&N Drop-in
-
- Posts: 103
- Joined: Tue Dec 03, 2013 2:27 pm
Re: Challenger R/T using TT Dyno Software
This is good news! So this means that my HP will be higher?
Re: Challenger R/T using TT Dyno Software
If you got the weight and all the other inputs correct.
2021 BMW M550i xDrive
BMC Drop ins, JB4
2010 Nissan Murano beater
K&N Drop-in
BMC Drop ins, JB4
2010 Nissan Murano beater
K&N Drop-in
-
- Posts: 103
- Joined: Tue Dec 03, 2013 2:27 pm
Re: Challenger R/T using TT Dyno Software
You're right and thanks for reminding me... I guesstimated on the weight.
-
- Posts: 103
- Joined: Tue Dec 03, 2013 2:27 pm
Re: Challenger R/T using TT Dyno Software
What software or device would you recommend? I checked out elm 327 obd2 and it looks fascinating.
Is there other device you would recommend?
Is there other device you would recommend?
Re: Challenger R/T using TT Dyno Software
I use 2 different ELM327 modules. A WiFi one for my iPhone that works with Engine Link, and a Bluetooth one for my Nexus (or any Android device) with Torque Pro. Truthfully, I prefer using a Diablo device over either one. Its just easier to work with for me. The Dashhawk was my choice in the past, but since MSD stopped supporting it, its died out. DashDAQ is nice, but stupidly expensive.
2021 BMW M550i xDrive
BMC Drop ins, JB4
2010 Nissan Murano beater
K&N Drop-in
BMC Drop ins, JB4
2010 Nissan Murano beater
K&N Drop-in
Re: Challenger R/T using TT Dyno Software
yes you hp and tq should be way higher. I have a 2012 dodge charger with 24's on it and I'm getting 373 hp and 349 tq with just diablo and k$N Cai and magna flow pipes.