Challenger R/T using TT Dyno Software

The DiabloSport Lounge

Moderator: mikel

Post Reply
macedo6466
Posts: 103
Joined: Tue Dec 03, 2013 2:27 pm

Challenger R/T using TT Dyno Software

Post by macedo6466 »

Wanted to share this...

2014 Challenger R/T
Mods:
Catback Flowmaster
93 Octane custom tune.


I uploaded the CVS file from my DiabloSport Log and uploaded it to TT Dyno software and here are the results.

274 HP at 5600 RPM
286 Torque at 4400 RPM

I noticed some knock at WOT

Not satisfied. I was hoping for more..
I will be re-loading a custom tune 91 Octane and compare the results.
Attachments
LOG_2_93OCTANE.LOG
DiabloSport Log file: street and freeway run.
(534.61 KiB) Downloaded 850 times
2014 Challenger R/T
2014 Challenger R/T
TT Dyno.jpg (150.93 KiB) Viewed 18547 times
User avatar
06MonteSS
Posts: 17964
Joined: Tue Jan 23, 2007 11:33 am
Contact:

Re: Challenger R/T using TT Dyno Software

Post by 06MonteSS »

that TT Dyno software is not really accurate haha. .I know what you're talking about, I tried it out years ago...

you're better off using Torque Pro app for your cell phone....
06MonteSS / DiabLew Tune
Image
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
User avatar
Mike_Levy
Posts: 6727
Joined: Fri Oct 26, 2007 8:11 pm
Location: Between Orlando and Tampa

Re: Challenger R/T using TT Dyno Software

Post by Mike_Levy »

TTDyno is about 5% below a chassis dyno. I've used it multiple times and have actually dynoed the vehicles.

I still hate Torque. Its interface is horrible. It doesn't log properly. And its Android only, so I gotta drag out the Nexus. 3 strikes, they're out.
2021 BMW M550i xDrive
BMC Drop ins, JB4

2010 Nissan Murano beater
K&N Drop-in
macedo6466
Posts: 103
Joined: Tue Dec 03, 2013 2:27 pm

Re: Challenger R/T using TT Dyno Software

Post by macedo6466 »

This is good news! So this means that my HP will be higher?
User avatar
Mike_Levy
Posts: 6727
Joined: Fri Oct 26, 2007 8:11 pm
Location: Between Orlando and Tampa

Re: Challenger R/T using TT Dyno Software

Post by Mike_Levy »

If you got the weight and all the other inputs correct.
2021 BMW M550i xDrive
BMC Drop ins, JB4

2010 Nissan Murano beater
K&N Drop-in
macedo6466
Posts: 103
Joined: Tue Dec 03, 2013 2:27 pm

Re: Challenger R/T using TT Dyno Software

Post by macedo6466 »

You're right and thanks for reminding me... I guesstimated on the weight.
macedo6466
Posts: 103
Joined: Tue Dec 03, 2013 2:27 pm

Re: Challenger R/T using TT Dyno Software

Post by macedo6466 »

What software or device would you recommend? I checked out elm 327 obd2 and it looks fascinating.
Is there other device you would recommend?
User avatar
Mike_Levy
Posts: 6727
Joined: Fri Oct 26, 2007 8:11 pm
Location: Between Orlando and Tampa

Re: Challenger R/T using TT Dyno Software

Post by Mike_Levy »

I use 2 different ELM327 modules. A WiFi one for my iPhone that works with Engine Link, and a Bluetooth one for my Nexus (or any Android device) with Torque Pro. Truthfully, I prefer using a Diablo device over either one. Its just easier to work with for me. The Dashhawk was my choice in the past, but since MSD stopped supporting it, its died out. DashDAQ is nice, but stupidly expensive.
2021 BMW M550i xDrive
BMC Drop ins, JB4

2010 Nissan Murano beater
K&N Drop-in
pimppolo
Posts: 7
Joined: Tue May 14, 2013 7:57 pm

Re: Challenger R/T using TT Dyno Software

Post by pimppolo »

yes you hp and tq should be way higher. I have a 2012 dodge charger with 24's on it and I'm getting 373 hp and 349 tq with just diablo and k$N Cai and magna flow pipes.
Post Reply