Board index (Legacy) Predator Technical Discussion Predator GM Gas 2011 chevy 6.0 support

2011 chevy 6.0 support

Predator support for GM gas vehicles

Moderators: mikel, 06MonteSS

Post Mon Dec 20, 2010 10:19 am

Posts: 55110
Location: DiabloSport World Headquarters

Can you describe the whole process, from start to finish?
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Dec 20, 2010 11:08 am

Posts: 19
I have a 2011 chevy 2500hd 4x4 lt 6.0 gas 6 speed auto. I get in vehicle and set brake turn off all accesories and plug in predator. I then turn key on and wait for predator to boot up. I then read the disclaimer and hit agree. It counts to about 18 seconds 3 to 4 times. Then a hour glass pops up for a couple seconds. It then makes my dash abs, 4x4 and integrated brake controller lights illuminate. It makes all my guages go to 0. Then it goes back to counting 2 to 3 more times then all the guages reset and lights go off. The screen says Failure cut. i hit more info it says PCM error root\seed (-1). I have tried this with multiple fuses pulled for all the accesories. I have tried with all fuses in place. Truck has no aftermarket accesories.

Post Mon Dec 20, 2010 11:25 am

Posts: 55110
Location: DiabloSport World Headquarters

And the revision displayed on the top line is 9t19?
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Dec 20, 2010 11:32 am

Posts: 19
Yes sir.

Post Mon Dec 20, 2010 11:46 am

Posts: 55110
Location: DiabloSport World Headquarters

Can you post your VIN number so we can check this on the bench?
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Dec 20, 2010 11:51 am

Posts: 19
1GC1KXCG2BF161322

Post Mon Dec 20, 2010 12:00 pm

Posts: 55110
Location: DiabloSport World Headquarters

Ahhah.
Turns out your truck uses a different PCM than the rest of the 2011s, thus it is not currently supported.

Sorry about that.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Dec 20, 2010 12:26 pm

Posts: 19
When r u looking at getting support

Post Mon Dec 20, 2010 1:23 pm

Posts: 55110
Location: DiabloSport World Headquarters

No ETA at the moment.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Sep 09, 2019 11:27 pm

Posts: 1
I am having the same issue but with a 2012 gmc 2500. It goes for a while and then shows the cutout error. I haven’t tried it with the parking brake applied and do not have any afternarket parts. It is the Diablo sport u7194.

Post Tue Sep 10, 2019 11:25 am

Posts: 55110
Location: DiabloSport World Headquarters

U7194 never worked on 11-up 6.0 applications, just the 07-14 4.8/5.3/6.2 trucks.


Thanks
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Wed Sep 11, 2019 3:34 pm

Posts: 17561
Location: CT

yeah.. there is no new support going to be added for those olllllld predators guys... they are dead and gone - were discontinued many years ago... plus, those old predator's could not tune the transmission either...

you can do a trade-in to diablosport and get a discount on buying the new inTune i3 8245 Platinum or the Trinity T2 EX 9245 Platinum tools... then you would have full vehicle support for both the engine and transmissions in those vehicles...
06MonteSS / DiabLew Tune
Image
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net

Previous

Return to Predator GM Gas