What do I need to do?

Predator support for Dodge gas vehicles

Moderator: mikel

Post Reply
Frankiet1525
Posts: 3
Joined: Wed Mar 29, 2017 10:51 pm

What do I need to do?

Post by Frankiet1525 »

I just purchased a 2017 Ram 1500 5.7l hemi my old truck was a 2015 Ram 2500 6.4l. I have the trinity tuner and the programmable pcm that I bought from Diablo. I cleared the tuner and pulled the pcm from my old truck. Can I use this pcm for this truck? What will I need to get to make my tuner work?
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: What do I need to do?

Post by mikel »

if they are both 8 speeds the same pcm will work, give us a call to set up the send in to have it reprogrammed, its $100 to revin the pcm, be sure to indicate that it is not from the original vehicle.

Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Frankiet1525
Posts: 3
Joined: Wed Mar 29, 2017 10:51 pm

Re: What do I need to do?

Post by Frankiet1525 »

The 6.4 was a 6 speed and the new truck is a 8 speed. Do you offer a trade in discount? What could I do?
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: What do I need to do?

Post by mikel »

We dont offer a trade in on pcms, best bet would be to sell the one you have to someone with a similar truck, and they can send it here to be programmed for their vehicle for $100.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Post Reply