Board index General Technical Support DataViewer DataView always crashes when opening 2nd log

DataView always crashes when opening 2nd log

Questions and comments regarding the DiabloSport data logging tools.

Moderators: mikel, Vas@Diablosport, JonDiablosport


Posts: 33
I have noticed that I can't open a second log without having DV crash on me.

I'm running version 3.4.1.4 and use an Intune (not using real time data mode) to datalog an SRT-4. I think this has been going on for a long time.

Here's how to reproduce the issue:
-Open DV
-Click Open log and select a log
-Check at least one PID on the left hand column (or else it won't fail)
-Click Open log again and select a new log.
-Click either Yes or No when asked if you want to save the current log.
*DV crashes with the message "Dataviewer application has encountered a problem and needs to close."

I have noticed that if I follow these same steps with the sample logs (F150 parking lot and F150 short wot), it doesn't crash.

My initial guess is that it might have to do with the fact that I log an external PID (AFR).

Can you guys help? It's not a show stopper but it is annoying.


Posts: 51858
Location: DiabloSport World Headquarters

post one of your logs please.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Posts: 33
Here go go.

I just tested on my home computer (Win10) but it works fine, it seems to only crash on my laptop that uses XP.
Attachments
1B3ES66S54D570037_07.log
(1.01 MiB) Downloaded 55 times


Posts: 51858
Location: DiabloSport World Headquarters

Hmm, not sure how much effort I can get them to put into an XP issue at this point, let me see.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Return to DataViewer