DCX Update issues on Windows 10
Moderator: mikel
DCX Update issues on Windows 10
Last week I updated to Windows 10, I had an old version of DSDownloader but since it kept working, I didn't want to rock the boat. However, when trying the DCX updater, I ran into problems with an error saying that it couldn't connect to the Diablosport server. So after reading the forums I figured I better update DSDownloader. I downloaded the version from the Diablosport Downloads page (2.2.2.11) but still got the update notification on startup, I ignored it and tried the DCX update again and once again got the error about not being able to reach the Diablosport server. So then I restarted DSDownloader and when the update notification popped up, I chose to update it through the program which updated it to 2.3.1.0, which allowed the DCX update to start up but now I'm getting an error saying the calibration is not supported by the calibration update server. I've never seen this issue come up before, please help me! Thank you!
- Attachments
-
- Diablosport Error.jpg (86.61 KiB) Viewed 17182 times
Re: DCX Update issues on Windows 10
Hey guys, I was hoping for a reply today. I just wanted to make sure somebody was working on this. Thank you!
Re: DCX Update issues on Windows 10
Hello? Help please
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: DCX Update issues on Windows 10
save the attached file here:
C:\Program Files\DiabloSport\DSDownloader
then open dsdl and click the calibration updater button and it should work as needed.
C:\Program Files\DiabloSport\DSDownloader
then open dsdl and click the calibration updater button and it should work as needed.
- Attachments
-
- local.drg
- (476.32 KiB) Downloaded 775 times
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: DCX Update issues on Windows 10
Now I got a new error
- Attachments
-
- Diablosport Error - 2.jpg (95.95 KiB) Viewed 17070 times
Re: DCX Update issues on Windows 10
And yes, the tool's firmware is up to date and running 9r30
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: DCX Update issues on Windows 10
delete the local file and let dsdl try it again, the server is fixed now.
Thanks
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: DCX Update issues on Windows 10
I tried again this morning but now the calibration updater doesn't pop up for me. Is this going to work as it is? I sold this to a customer online and had them send it back to me to do the calibration update so they wouldn't have to deal with it. If I send it back to them are they going to just have the calibration error come up again when they try to program their vehicle and then have to run the calibration updater on DSDL again?
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: DCX Update issues on Windows 10
if the button does not appear for you the flag is no longer set, did you update the tool?
It will have to be plugged back into the vehicle to set the flag again.
It will have to be plugged back into the vehicle to set the flag again.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com