Board index Trinity Technical Discussion Trinity Ford Gas AFR/Lambda reported not logging?

AFR/Lambda reported not logging?

Post questions about your Trinity for a Ford vehicle here.

Moderators: mikel, sohfast94

Post Tue Jan 19, 2016 10:43 am

Posts: 12
I have been trying to log AFR/Lambda reported, but it never shows in the logs. Commanded shows up just fine though. Is this a limitation or am i doing something wrong? trying to log the following:

AFR/Lambda reported B1
throttle angle
rpm
LTFT B1 (always around -4)
LTFT B2 (always around -8)
cat temp
timing advance cyl 1

even if you can't help with the equivalence ratio logging, do my LTFT's mean my tune is off or i have a problem? was going to attempt to use dslog redux but can't get the needed parameters in log.

thanks for all you guys do!

Post Tue Jan 19, 2016 11:05 am

Posts: 55155
Location: DiabloSport World Headquarters

post the log...
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Tue Jan 19, 2016 11:59 am

Posts: 12
if csv format isn't good i will grab my device at lunch and post the log
Attachments
WARM_IDLE_10MIN.csv
(3.94 MiB) Downloaded 63 times

Post Tue Jan 19, 2016 12:27 pm

Posts: 55155
Location: DiabloSport World Headquarters

yeah, the actual log please.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Tue Jan 19, 2016 12:55 pm

Posts: 12
here ya go
Attachments
WARMIDLE10.LOG
(425.75 KiB) Downloaded 64 times

Post Wed Jan 20, 2016 2:00 pm

Posts: 12
have you had a chance to look at the log mike?

Post Wed Jan 20, 2016 2:55 pm

Posts: 744
i opened the log and bank 1 and 2 lambda are showing fine. what version of data viewer are you using?


or are you saying that you cannot see it on the tool?
Attachments
Capture.PNG
Capture.PNG (124.06 KiB) Viewed 1687 times

Post Wed Jan 20, 2016 10:19 pm

Posts: 12
i cannot see it in data viewer, using version 3.3.0.8.......and i clicked on help and noticed the version build is march of 2011. sigh. went to your downloads and pulled down the newest version 3.3.0.17, now everything is showing. I am sorry for wasting your time and appreciate all your help at diablosport. i assumed when i installed the software from CD it would have checked for new versions because the trinity did. my bad. Thank you! i am going to verify DSdownloader is up to date now also

Post Thu Jan 21, 2016 9:55 am

Posts: 744
icepic wrote:
i cannot see it in data viewer, using version 3.3.0.8.......and i clicked on help and noticed the version build is march of 2011. sigh. went to your downloads and pulled down the newest version 3.3.0.17, now everything is showing. I am sorry for wasting your time and appreciate all your help at diablosport. i assumed when i installed the software from CD it would have checked for new versions because the trinity did. my bad. Thank you! i am going to verify DSdownloader is up to date now also



no problem :)

ya the cd only gets you up and running you have to download the latest stuff. we are working on an auto updater though. let me know how it goes


Return to Trinity Ford Gas