I have been trying to log AFR/Lambda reported, but it never shows in the logs. Commanded shows up just fine though. Is this a limitation or am i doing something wrong? trying to log the following:
AFR/Lambda reported B1
throttle angle
rpm
LTFT B1 (always around -4)
LTFT B2 (always around -8)
cat temp
timing advance cyl 1
even if you can't help with the equivalence ratio logging, do my LTFT's mean my tune is off or i have a problem? was going to attempt to use dslog redux but can't get the needed parameters in log.
thanks for all you guys do!
AFR/Lambda reported not logging?
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: AFR/Lambda reported not logging?
post the log...
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: AFR/Lambda reported not logging?
if csv format isn't good i will grab my device at lunch and post the log
- Attachments
-
- WARM_IDLE_10MIN.csv
- (3.94 MiB) Downloaded 240 times
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: AFR/Lambda reported not logging?
yeah, the actual log please.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: AFR/Lambda reported not logging?
here ya go
- Attachments
-
- WARMIDLE10.LOG
- (425.75 KiB) Downloaded 235 times
Re: AFR/Lambda reported not logging?
have you had a chance to look at the log mike?
-
- Posts: 738
- Joined: Thu Jul 02, 2015 11:19 am
Re: AFR/Lambda reported not logging?
i opened the log and bank 1 and 2 lambda are showing fine. what version of data viewer are you using?
or are you saying that you cannot see it on the tool?
or are you saying that you cannot see it on the tool?
- Attachments
-
- Capture.PNG (124.06 KiB) Viewed 3789 times
Re: AFR/Lambda reported not logging?
i cannot see it in data viewer, using version 3.3.0.8.......and i clicked on help and noticed the version build is march of 2011. sigh. went to your downloads and pulled down the newest version 3.3.0.17, now everything is showing. I am sorry for wasting your time and appreciate all your help at diablosport. i assumed when i installed the software from CD it would have checked for new versions because the trinity did. my bad. Thank you! i am going to verify DSdownloader is up to date now also
-
- Posts: 738
- Joined: Thu Jul 02, 2015 11:19 am
Re: AFR/Lambda reported not logging?
icepic wrote:i cannot see it in data viewer, using version 3.3.0.8.......and i clicked on help and noticed the version build is march of 2011. sigh. went to your downloads and pulled down the newest version 3.3.0.17, now everything is showing. I am sorry for wasting your time and appreciate all your help at diablosport. i assumed when i installed the software from CD it would have checked for new versions because the trinity did. my bad. Thank you! i am going to verify DSdownloader is up to date now also
no problem
ya the cd only gets you up and running you have to download the latest stuff. we are working on an auto updater though. let me know how it goes