We private label the device through PLX.
I lived with a 06 6.0 for 3 years with a Trinity and this same exact EGT kit, and it worked perfectly, as it has for anyone else who has purchased it from us, which is why I feel there is an issue in the vehicle, or in the wiring.
If you'd like to send the unit back to be checked out, we can do that.
If you'd like to return it, and get another one or another brand, that will work too, the Trinity will accept any 0-5 V input from any popular EGT devices on the market.
We did not create/spec/design or manufacture the EGT, we just put it in a diablo box
The data stream has stopped, waiting for engine to start
Moderator: mikel
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Re: RE: The data stream has stopped, waiting for engine
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
RE: Re: RE: The data stream has stopped, waiting for engine
Mike,
I'm just looking for possiable solution, process of limitation. It seem like the EGT module is the most likey corrupt, but made be its the programmer or a issue with my vehicle? I've found older post mention the same error message and referencing (Analog input or to many PIDs) so, again just trying to go with what I think is the obvious. Would appreciate any futher suggestion, before I throw in the towel.
Thanks
I'm just looking for possiable solution, process of limitation. It seem like the EGT module is the most likey corrupt, but made be its the programmer or a issue with my vehicle? I've found older post mention the same error message and referencing (Analog input or to many PIDs) so, again just trying to go with what I think is the obvious. Would appreciate any futher suggestion, before I throw in the towel.
Thanks
Re: The data stream has stopped, waiting for engine to start
I was wondering if anyone forund a solid answer to this issue. I've been having the same error (The data stream has stopped, waiting for engine to start) on my 2008 Hummer H3 with the 3.7l I5. I've tried everything listed in this post with no luck.
Re: The data stream has stopped, waiting for engine to start
Go to options -> show information and gimme the version please.
Insert Clever comment here...
Please do not PM me as I rarely see the notifications.
Please do not PM me as I rarely see the notifications.
Re: The data stream has stopped, waiting for engine to start
V.1r10c. I've recently noticed that if lightly jiggle the wire at the connection on the back of the trinity, it will start working fine after a couple of seconds. It's beginning to happen more often though.
Re: The data stream has stopped, waiting for engine to start
Sounds more like a hardware issue. As this had been fixed quite some time ago....
Insert Clever comment here...
Please do not PM me as I rarely see the notifications.
Please do not PM me as I rarely see the notifications.