Board index Trinity Technical Discussion Trinity Dodge Gas 13 Durango 3.6l tuning issues

13 Durango 3.6l tuning issues

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderators: mikel, JonDiablosport, Vas@Diablosport

Post Tue Sep 05, 2017 10:20 pm

Posts: 140
Location: SW MS
Hi, i posted somthing similar roughly a year and a half ago about this issue but i was not able to complete it on my end because of my work schedule. Id like to make a second attempt at it. Here is my problem.

I have been having numerous hiccups when tuning my 13 Durango. First when saving original backup It takes nearly 3 or 4 tries before it saves the backup. It states original backup not saved -11. When this happens I have to pull the key and leave the D alone for a minute or 2 because it locks the vehicle up. After the vehicle powers down i can make another attempt. Eventually it will save the backup.

The next problem from there is, it also takes multiple times to get the tune to take. On a failed attempt the trinity tells me PCM:error unlock for refresh -18. The trinity locks up but the truck functions normally afterwards. Eventually it will install. This is just frustrating when changing tunes or switching vehicles.

Trinity is updated to 1r13g
cal id is 68170442AC
Vin: 1C4RDHAG0DC689113

If I need a cal update I should have the vehicle all day if needed.
2006 Ram 1500 quad cab 4.7L
DiabloSport Trinity
Gibson SS shorties
Edge 2800 Converter
72mm F&B Throttle body

Post Thu Sep 07, 2017 9:16 am

Posts: 51773
Location: DiabloSport World Headquarters

push button or keyed ignition?
any aftermarket electronics in the vehicle?

Thanks
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Thu Sep 07, 2017 7:00 pm

Posts: 140
Location: SW MS
Keyed ignition and there's no aftermarket electronics installed

Thanks.
2006 Ram 1500 quad cab 4.7L
DiabloSport Trinity
Gibson SS shorties
Edge 2800 Converter
72mm F&B Throttle body

Post Fri Sep 08, 2017 8:02 am

Posts: 51773
Location: DiabloSport World Headquarters

we can try forcing a calibration update to the pcm, can you give us a call today with the device powered up in the truck?

Thanks
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Fri Sep 08, 2017 8:07 am

Posts: 140
Location: SW MS
Yes I can. Thanks
2006 Ram 1500 quad cab 4.7L
DiabloSport Trinity
Gibson SS shorties
Edge 2800 Converter
72mm F&B Throttle body

Post Fri Sep 08, 2017 5:08 pm

Posts: 140
Location: SW MS
Well there was an issue when trying to do the calibration update. The application froze after i plugged the trinity in. I saw the calibration update button but DS downloader closed before it did anything. I tried it again and the calibration update button is no longer shown.
2006 Ram 1500 quad cab 4.7L
DiabloSport Trinity
Gibson SS shorties
Edge 2800 Converter
72mm F&B Throttle body

Post Tue Sep 12, 2017 11:02 am

Posts: 51773
Location: DiabloSport World Headquarters

speedy wrote:
Well there was an issue when trying to do the calibration update. The application froze after i plugged the trinity in. I saw the calibration update button but DS downloader closed before it did anything. I tried it again and the calibration update button is no longer shown.

start over at the vehicle and agree to the cal update request then try again at pc please.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Return to Trinity Dodge Gas