Board index Trinity Technical Discussion Trinity Dodge Gas Trouble with data logging

Trouble with data logging

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Sun Jun 21, 2020 9:53 pm

Posts: 53
trying to datalog but the numbers are not correct. Easiest ones to notice are the Temps. You can clearly see on data viewer that ect and act are reading negative, also obviously air temp and coolant temp are not that cold. Lots of other numbers not right either but those are the easy ones to check. Also whenever I log VIA trinity by itself and then pull it up to dataviewer no important PIDS are shown, only time I could get all the default DCX PIDS is when I log via live log on my laptop.
Attachments
NEWMOTORLOG2.log
(63.68 KiB) Downloaded 8 times

Post Sun Jun 21, 2020 11:18 pm

Posts: 53
Also have the recent update, I even unmarried the device and reloaded the tune I was sent by my tuner. Don’t know what else to try

Post Mon Jun 22, 2020 11:13 am

Posts: 56316
Location: DiabloSport World Headquarters

what vehicle is this?
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Jun 22, 2020 11:37 am

Posts: 53
It’s a 2007 SRT8 dodge charger

Post Mon Jun 22, 2020 11:57 am

Posts: 56316
Location: DiabloSport World Headquarters

OK, uninstall dv, then install this one.
When it asks to update, click no, this should work for you for now.
download/file.php?id=12633
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Jun 22, 2020 12:02 pm

Posts: 53
Awesome I’ll give it a shot when I make it home, thanks!

Post Mon Jun 22, 2020 12:13 pm

Posts: 53
Another question, would I have to record another log? After installing 3.3? and will this fix the missing PIDS?

Post Tue Jun 23, 2020 2:46 pm

Posts: 56316
Location: DiabloSport World Headquarters

the existing logs should open properly and look ok in the old dv.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Return to Trinity Dodge Gas