Board index Trinity Technical Discussion Trinity Dodge Gas Caliber SRT4 WOT BOX Causing limp mode

Caliber SRT4 WOT BOX Causing limp mode

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Fri Oct 25, 2019 7:30 pm

Posts: 5
I'd like to run my WOT BOX with the canned 93 tune for now till I get a custom tune. What can I do to allow the tune to not send the car into limp mode when I activate 2 step and WOT shift?
2008 Caliber SRT4 #1547

Post Tue Oct 29, 2019 11:58 am

Posts: 56369
Location: DiabloSport World Headquarters

load the tune then post the last tune written file here.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Wed Oct 30, 2019 10:15 am

Posts: 5
Do you need my backup as well?
2008 Caliber SRT4 #1547

Post Wed Oct 30, 2019 11:46 am

Posts: 5
mikel wrote:
load the tune then post the last tune written file here.


Heres my backup tune and the 93 tune that I will be using.

Thanks!
Attachments
PCM_05187661AF_Perf_93oct.drg
(3.25 KiB) Downloaded 128 times
PCM_05187661AF_Backup.drg
(781.16 KiB) Downloaded 126 times
2008 Caliber SRT4 #1547


Posts: 56369
Location: DiabloSport World Headquarters

here you go
Attachments
PCM_05187661AF_2step.drg
(573.77 KiB) Downloaded 120 times
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Posts: 5
mikel wrote:
here you go

Ok so I installed the tune. As soon as I 2 step, check engine light comes on and goes right into limp mode still... am I missing something?
2008 Caliber SRT4 #1547


Posts: 56369
Location: DiabloSport World Headquarters

Not sure...post the last tune written please.

what was the code?
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Posts: 5
mikel wrote:
Not sure...post the last tune written please.

what was the code?


Heres the last tune written, I'm using a trinity if that changes anything. Codes are P2302, P2305, P2308, and P2311 all for the ignition coils. I appreciate all the help.
Attachments
PCM_05187661AF_pcm_05187661af_2step.drg.drg
(1.25 KiB) Downloaded 118 times
2008 Caliber SRT4 #1547


Posts: 56369
Location: DiabloSport World Headquarters

you didnt load it properly.
You selected the same tune as the tune to load and as the backup.
You must select a copy of the stock tune as the backup when prompted so the tool can see the differences and send them to the device.


Thanks
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Thu Jul 02, 2020 10:12 pm

Posts: 2
Hi, I have a Diablosport Trinity on the 93 octane tune. I am having the same problem with the N2MB WOT box 2 step feature. DTC codes are P2302, P2305, P2308, P2311, P0300. Any help would be appreciated! Thank you! Attached are my backup and current tune files.... Please let me know if any other info is needed.
Attachments
PCM_05030394AM_Perf_93oct_modified.drg
(3.25 KiB) Downloaded 32 times
PCM_05030394AM.drg
(781.01 KiB) Downloaded 25 times

Post Mon Jul 06, 2020 11:09 am

Posts: 56369
Location: DiabloSport World Headquarters

Tsmacz wrote:
Hi, I have a Diablosport Trinity on the 93 octane tune. I am having the same problem with the N2MB WOT box 2 step feature. DTC codes are P2302, P2305, P2308, P2311, P0300. Any help would be appreciated! Thank you! Attached are my backup and current tune files.... Please let me know if any other info is needed.

here you go.
Attachments
PCM_05030394AM_2_step.drg
(573.7 KiB) Downloaded 25 times
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Posts: 2
Thank you, I'll let you know if any other issues.


Return to Trinity Dodge Gas