trinity for srt 4 questions

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Reply
dhughes512
Posts: 1
Joined: Sun Jul 26, 2009 3:48 am

trinity for srt 4 questions

Post by dhughes512 »

Like the title says. do the AEM wideband and guage with the trinity work together? and with the trinity can i adjust the A/F ratio? sorry if these are dumb questions... just tryin finish my parts list so i can order my stuff. thanks
User avatar
gizmodo
Posts: 742
Joined: Wed Jan 21, 2009 3:52 pm

RE: trinity for srt 4 questions

Post by gizmodo »

I don't think the AEM unit has analog output, only serial. The Trinity currently only supports analog input, but there is a serial connector on the back that will eventually allow for serial communications.

You can't adjust air/fuel ratio directly with the Trinity, but you can add/remove fuel, timing and boost with the Trinity, which should fit your needs for a mostly stock car. If you have a lot of mods, you will need to get a custom tune from a CMR dealer.
The apostrophe does not mean "Look out, here comes an S"!

"I couldn't care less" means it is impossible to care less - "I could care less" just makes you look stupid.
BoostingSnail
Posts: 9
Joined: Thu Jan 22, 2009 10:15 pm

RE: trinity for srt 4 questions

Post by BoostingSnail »

AEM has an analog output...it's what I use
sfla_srt4
Posts: 271
Joined: Wed Oct 15, 2008 12:42 pm

RE: trinity for srt 4 questions

Post by sfla_srt4 »

I have the EUGO on my Trinity.. You just have to wire it up with an analog input plug and plug in the numbers for the settings.
Post Reply