That the latest version of DSDL allows you to upload/download Trinity dashes?
Using the Trinity manager tab at the bottom of DSDL 2219, you can upload dashes from the Trinity to the PC or download dashes from the PC to the Trinity.
For some reason, the SRT4 applications use the HEMI layouts, so hers a couple SRT4 layouts for U7134 users:
Open dsdl, let it find the trinity, click the Trinity Browser button.
Click 'refresh'.
It will show a list of all part numbers, click on 7134, and click 'Put'.
Browse for one of these layouts, and select it, DSDL will load it into your Trinity.
Load 1 at a time until you are done and then when you go to the monitoring or logging menu, both of these layouts will appear.
Did you know...
Moderator: mikel
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Did you know...
- Attachments
-
- SRT_4.TDS
- (642 Bytes) Downloaded 1053 times
-
- SRT_4_2.TDS
- (554 Bytes) Downloaded 1210 times
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
- ColdfusionDesigns
- Posts: 55
- Joined: Sun Jan 16, 2011 9:02 pm
RE: Did you know...
Tried to "Put" But it didnt upload to my Trinity. My others will upload fine but not these one and only these. :/ oh well. I just wanted to see the layout you guys had.
RE: Did you know...
Had issues putting files with the DSDL too .. It worked importing from the SD card though..
RE: Did you know...
Those two are already in the 1r08aa crom.
The apostrophe does not mean "Look out, here comes an S"!
"I couldn't care less" means it is impossible to care less - "I could care less" just makes you look stupid.
"I couldn't care less" means it is impossible to care less - "I could care less" just makes you look stupid.
Re: Did you know...
I am either not understanding correctly or am missing something in the process. I want to take Johans recommended PID list 07-up and make a dash of it for logging. The problem I come across is the dataviewer dashboard is a .dsh file and the trinity layout is a .tds. I tried uploading it anyway but have had no luck so far. I even tried renaming the .dsh file extension to .tds and see if I could "trick" it. The dash does not show up in the list of layouts on my Trinity.
Re: Did you know...
what exactly does this do?