I have an aem x series wideband hooked up now to my car and I have the mono jack running to the trinity and I am getting a reading from the analog but it is in volts!
So I tried changing limits from from 0- 5 volts to 10 to 19.98 but it still reads volts.
the volts move just right along with afr wideband, but how do I make the volts read to afr ratio numbers in the trinity?
Im sure Im missing something simple but I have hit so many buttons in the trinity I gave up.
asking for help.
Thanks Dennis
Trinity convert 0-5 volt analog to read afr in trinity
Moderator: mikel
Re: Trinity convert 0-5 volt analog to read afr in trinity
I go to options
I get to the screen that says volts and I change to afr and I get to a screen that says lower limits I type in 10 and then up limits type in 19.98 save that go to pick that as a gauge and it just reads volts.
I need a step by step, sure I'm missing a simple step.
I get to the screen that says volts and I change to afr and I get to a screen that says lower limits I type in 10 and then up limits type in 19.98 save that go to pick that as a gauge and it just reads volts.
I need a step by step, sure I'm missing a simple step.
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Trinity convert 0-5 volt analog to read afr in trinity
you have to create a gauge called AFR or similar and assign it to the same channel as the analog input so it displays in AFR.
Its all covered in the trinity user manual.
Thanks
Its all covered in the trinity user manual.
Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com