Board index Trinity Technical Discussion Trinity Dodge Gas Tune was not put into vehicle

Tune was not put into vehicle

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Mon Nov 05, 2018 12:21 pm

Posts: 2
Hello, my case number is 383712, Trinity T1000, Jeep SRT8 2008. I called you many times and we tried different options:
resetting device, updating device, updating my car firmware(dont remember exact name of this procedure), resetting car by unplugging battery, and some of those many times, and nothing worked. Than your technical guy said that its either trinity or my car. I checked t1000 on different Jeep and it worked fine, so it must be something about my Jeep I guess. But today I figured something out - everytime I try to write some tune on my car and get "Tune Was not put into vehicle" and than PCM error(screenshot) I also happen to get errors in Torque - OBDII program - network and powertrain! It only happens when I try to write something with Trinity. Any ideas? Thanks, Wojciech
45640422_710001899379347_216945189032296448_n.jpg (163.68 KiB) Viewed 794 times
45484571_255446638649968_4987640599088726016_n.jpg (159.42 KiB) Viewed 794 times
45543136_703521396690311_1089861703845281792_n.jpg (196.72 KiB) Viewed 794 times

Post Wed Nov 07, 2018 2:33 pm

Posts: 2
OK, found the answer with my local electronics guy - i have LPG installation in my vehicle, which is kinda popular in EU due to gas prices. My Stag 300 Premium controller was keeping PCM busy all the time asking for fuel trim/o2 sensor readings so Trinity couldnt connect with it properly. I've pulled LPG fuse and now everything works great, I programmed my vehicle without problems.

Post Thu Nov 08, 2018 8:49 am

Posts: 55714
Location: DiabloSport World Headquarters

glad to hear it.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
M-F 8:00 AM to 5:00 PM EST

Return to Trinity Dodge Gas