Tune was not put into vehicle

wojt_sgs · Post by **wojt_sgs** » Mon Nov 05, 2018 12:21 pm

Hello, my case number is 383712, Trinity T1000, Jeep SRT8 2008. I called you many times and we tried different options:
resetting device, updating device, updating my car firmware(dont remember exact name of this procedure), resetting car by unplugging battery, and some of those many times, and nothing worked. Than your technical guy said that its either trinity or my car. I checked t1000 on different Jeep and it worked fine, so it must be something about my Jeep I guess. But today I figured something out - everytime I try to write some tune on my car and get "Tune Was not put into vehicle" and than PCM error(screenshot) I also happen to get errors in Torque - OBDII program - network and powertrain! It only happens when I try to write something with Trinity. Any ideas? Thanks, Wojciech

wojt_sgs · Post by **wojt_sgs** » Wed Nov 07, 2018 2:33 pm

OK, found the answer with my local electronics guy - i have LPG installation in my vehicle, which is kinda popular in EU due to gas prices. My Stag 300 Premium controller was keeping PCM busy all the time asking for fuel trim/o2 sensor readings so Trinity couldnt connect with it properly. I've pulled LPG fuse and now everything works great, I programmed my vehicle without problems.

Post by **mikel** » Thu Nov 08, 2018 8:49 am

glad to hear it.

Tune was not put into vehicle

Tune was not put into vehicle

Re: Tune was not put into vehicle

Re: Tune was not put into vehicle