Board index Trinity Technical Discussion Trinity Dodge Gas Cannot Download Tool Updates

Cannot Download Tool Updates

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Sat May 18, 2019 6:43 pm
rpr

Posts: 7
My Trinity says it does not support my factory programming so it needs to downgrade it. It also says that Tool updates might be available and in fact I see that there are. I currently have 1r13i, and 1r13k is available for on the download page. However, I get Fatal Errors when I click on the download link.

Any help?

Post Sun May 19, 2019 6:05 pm
rpr

Posts: 7
Here’s the error message I am still getting:

Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 29493087 bytes) in /home/diablosport/public_html/dsdl/download.php on line 29

Can anyone help?

Post Mon May 20, 2019 8:46 am
rpr

Posts: 7
Just called tech support. No attempt to assist or troubleshoot other than to say the manual download links will not help, the auto update should work, and I have no choice other than to use an out of date downgraded factory calid as the base programming.

The tech got frustrated with my questions and hung up on me. Didn’t even want my current calid to confirm it’s not supported. What a company.

Post Mon May 20, 2019 9:16 am

Posts: 55453
Location: DiabloSport World Headquarters

what vehicle is this?
1r13k will still ask to downgrade unfortunately. It still supports the same calibrations.
1r13l is the latest for 05-10 models, attached here.
Attachments
trinity_dcx_gas-1r13l_update.crom
(10.36 MiB) Downloaded 51 times
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon May 20, 2019 9:32 pm
rpr

Posts: 7
It’s a 2014 Ram 1500 with a 5.7 Hemi and an 8-speed transmission. My factory PCM calid is 68153790AK.

Post Wed May 22, 2019 9:59 am

Posts: 55453
Location: DiabloSport World Headquarters

links are fixed.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Wed May 22, 2019 1:12 pm
rpr

Posts: 7
Can you let me know when 1r13i will be replaced to recognize the newer factory programming on the 2014 Rams? The latest updates I had installed on my 2014 were due to factory recalls, I suspect other customers of Diablo will soon be looking for an update to 1r13i as well. I prefer not to downgrade my factory programming.

Thanks.

Post Thu May 23, 2019 7:49 am

Posts: 55453
Location: DiabloSport World Headquarters

The t1000 no longer gets updates at this time.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Fri May 24, 2019 9:43 am
rpr

Posts: 7
Does the Trinity 2 currently support a 2014 Ram 1500 (5.7 Hemi with an 8-speed transmission) with a factory PCM calid of 68153790AK?

Post Fri May 24, 2019 10:02 am

Posts: 55453
Location: DiabloSport World Headquarters

No, T2 supports the AE version as well.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Sat May 25, 2019 8:13 am
rpr

Posts: 7
When can we expect T2 to support AK, or can’t we?


Return to Trinity Dodge Gas