Caliber SRT4 WOT BOX Causing limp mode

[Csrt4jimpo]

I'd like to run my WOT BOX with the canned 93 tune for now till I get a custom tune. What can I do to allow the tune to not send the car into limp mode when I activate 2 step and WOT shift?

[mikel]

load the tune then post the last tune written file here.

[Csrt4jimpo]

Do you need my backup as well?

[Csrt4jimpo]

load the tune then post the last tune written file here.

Heres my backup tune and the 93 tune that I will be using.

Thanks!

[mikel]

here you go

[Csrt4jimpo]

here you go

Ok so I installed the tune. As soon as I 2 step, check engine light comes on and goes right into limp mode still... am I missing something?

[mikel]

Not sure...post the last tune written please.

what was the code?

[Csrt4jimpo]

Not sure...post the last tune written please.

what was the code?

Heres the last tune written, I'm using a trinity if that changes anything. Codes are P2302, P2305, P2308, and P2311 all for the ignition coils. I appreciate all the help.

[mikel]

you didnt load it properly.
You selected the same tune as the tune to load and as the backup.
You must select a copy of the stock tune as the backup when prompted so the tool can see the differences and send them to the device.


Thanks

[Tsmacz]

Hi, I have a Diablosport Trinity on the 93 octane tune. I am having the same problem with the N2MB WOT box 2 step feature. DTC codes are P2302, P2305, P2308, P2311, P0300. Any help would be appreciated! Thank you! Attached are my backup and current tune files.... Please let me know if any other info is needed.

[mikel]

Hi, I have a Diablosport Trinity on the 93 octane tune. I am having the same problem with the N2MB WOT box 2 step feature. DTC codes are P2302, P2305, P2308, P2311, P0300. Any help would be appreciated! Thank you! Attached are my backup and current tune files.... Please let me know if any other info is needed.

here you go.

[Tsmacz]

Thank you, I'll let you know if any other issues.