2003 dodge 5.9 cummins tranny temp??
Moderator: mikel
2003 dodge 5.9 cummins tranny temp??
I purchased a trinity and installed it and found out the truck does not have the PID for the temp. ive called diablosport and the only answer i can get is "just order a sensor that sends a 0-5 volt signal". well everyone ive talked to says they dont have a temp sender that does this. I feel like the folks at diablosport should at least be able to tell me where and what to buy. But i am not getting anywhere with that i chose this over the edge and now kinda regretting it. if anyone has ever installed a temp sender on a dodge diesel using the trinity please help me out...
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: 2003 dodge 5.9 cummins tranny temp??
There are plenty of trans temp sensors, or any temp sensor that reads the temp range you desire...
google FTW:
http://www.plxdevices.com/product_info.php?id=SEMOSMFT
google FTW:
http://www.plxdevices.com/product_info.php?id=SEMOSMFT
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
Re: 2003 dodge 5.9 cummins tranny temp??
so in order to get the trinity to read tranny temp i need to purchase a module and a sensor correct?? and just wondering if the egt module i purchased through you guys will work for both egt and tranny temp at the same time ???
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: 2003 dodge 5.9 cummins tranny temp??
It would only do one, I dont think the egt box has multiple drivers.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com