Any chance of getting BT to make brackets that fit the V? I still have the can from the Jeep, so all I really need is a bracket.
Pulled off the breather line that goes to the intake tube and the whole thing is coated with oil. Obviously a catch can is necessary. How about it guys? Any chance, or should I just buy a Moroso?
Need a catch can for the CTS-V
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Need a catch can for the CTS-V
Hmmm....lemme check it out.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
RE: Need a catch can for the CTS-V
Now that I'm looking at it, I think I'm gonna need 2 cans. The main one for the PCV, and a second one, like I had on the Jeep plumbed into the breather. The intake pipe wouldn't get oil in it due to the PCV, so I must be sucking oil out of the breather line again.
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Need a catch can for the CTS-V
Might be a good idea to hit up Scott (1fast4door on LXf). Hes the BT guy, and could likely make it happen pretty easy
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
RE: Need a catch can for the CTS-V
I'll email him tomorrow after I hear back from Moroso. Hoping to be able to get a discount from them if I drive up and let them design the second can on my car.
Its not accurate, but theres a reason people call me "a cheap jew". Not 100% jewish, but definitely 100% cheap.
Its not accurate, but theres a reason people call me "a cheap jew". Not 100% jewish, but definitely 100% cheap.