Car dies after tune, shows PCM error code
-
- Posts: 2
- Joined: Thu Jul 27, 2017 1:48 pm
Car dies after tune, shows PCM error code
Hi there, new to the tuning world and new to the forum. Recently I had bought a Diablosport i2 for my '05 Dodge Magnum RT. Shortly after uploading a simple tune to the vehicle, my check engine light intermittently turns on and the car dies. After it dies the low oil light and ESP/BAS light flash. I've pulled the codes stored using the i2 and it showed p0601 and p0600 which I'm assuming indicates a bad PCM. Would anyone know what caused this? Is there any fixes before I try a new PCM?
- mikel
- Posts: 57766
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Car dies after tune, shows PCM error code
Man, those are indeed signs of an unhappy PCM. Not sure what could have caused it, but I would indeed look into replacing it.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
-
- Posts: 2
- Joined: Thu Jul 27, 2017 1:48 pm
Re: Car dies after tune, shows PCM error code
Unhappy indeed Any recommendations on PCMs that could handle the tuner?