Board index inTune i-1000 Technical Discussion Auto Updater/PC related issues PCM Calibration update needed error

PCM Calibration update needed error

Post any issues or questions regarding the inTune auto updater application, or any PC related issues here.
Post Fri Dec 23, 2016 11:08 am

Posts: 17780
Location: CT

they're closed for Christmas holiday.. won't be back until Tuesday...

Technical Support

Telephone: 561-908-0040
06MonteSS / DiabLew Tune
Image
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net

Post Wed Feb 27, 2019 1:11 am

Posts: 2
Am having the same problem on my Jeep the dealer probably did an update too what do I do?

Post Fri Sep 13, 2019 3:10 pm

Posts: 1
Bought a i1000 used got it unlocked and now i am getting the pcm calibration update needed error. what do i need to do????
Attachments
info.xml
(1.76 KiB) Downloaded 373 times

Post Fri Sep 13, 2019 8:24 pm

Posts: 17780
Location: CT

what is the year, model, engine of your vehicle????
06MonteSS / DiabLew Tune
Image
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net

Post Sun Feb 09, 2020 12:30 am

Posts: 3
Hello,

I have an I-1000 DCX. My tuner worked 2 days ago then I took it into the dealership for a new thermostat. Now, I get the message:
PCM calibration for 2C3CDXHG0DH571568 might need an update. Check for a calibration update?

Update manager says my tuner is up to date...but I just get the same msg again and again.

Help!

Post Mon Feb 10, 2020 10:27 am

Posts: 56467
Location: DiabloSport World Headquarters

posty the info.xml file from the intune drive please.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Feb 10, 2020 8:00 pm

Posts: 3
info.xml file attached.

Thanks!
ccbenn
Attachments
info.xml
(2.33 KiB) Downloaded 293 times

Post Tue Feb 11, 2020 4:42 pm

Posts: 56467
Location: DiabloSport World Headquarters

you didn't return it to stock prior to the dealer update, so the device needs to be reset.
give us a call with it powered up and reference that I asked you to call for a reset.


Thanks
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Tue Feb 11, 2020 6:01 pm

Posts: 3
Thanks Mike!

I'll call Wednesday morning.

Thanks again,
ccbenn

Post Sun May 03, 2020 12:12 pm

Posts: 1
Hi Mike,

My fuel pump failed and was towed to the dealer where they flashed the PCM. I am now having this same issue where it keeps telling me to do a calibration update but no update is found when I plug into the update agent. Attached is my info.xml. Can you help me get this solved?
Attachments
info.xml
(1.8 KiB) Downloaded 111 times

Post Mon May 04, 2020 11:26 am

Posts: 56467
Location: DiabloSport World Headquarters

if you didn't restore prior to going to the dealer you'll need to call in and have the device reset first.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Previous

Return to Auto Updater/PC related issues