Board index inTune i-1000 Technical Discussion Mac/Non Windows based issues Latest Intune release here.

Latest Intune release here.

For inTune users who prefer to not use Windows, we'll help you out in your own section.
Post Thu May 28, 2015 10:02 am

Posts: 55155
Location: DiabloSport World Headquarters

save this to the intune drive and let it import the fiile then load it to the vehicle then you may tune it.
Attachments
68105857ac.drg
(800.15 KiB) Downloaded 356 times
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Fri May 29, 2015 9:38 pm

Posts: 6
Hey guys. I just tried plugging the Intune into my 2005 C6 Corvette. When i run the program and try to write vehicle i get the message "PCM calibration for (vin#) might need an update. Attempt a backup read?" When I do the backup read, it tells me to email the file to support@diablosport which I did. I will try to post that in here and my info folder but I am not too great at this stuff. Please let me know if you can help me with getting this tuner to work!! Been happy with all my diablo products in the past, really want to be able to get this one to work! Thanks
Attachments
info.xml
(2.21 KiB) Downloaded 220 times

Post Fri May 29, 2015 9:39 pm

Posts: 6
Also here is the file it told me to email to the support email.

Thanks,
Dustin
Attachments
PCM__UnknownBackup.grg
(439.33 KiB) Downloaded 279 times

Post Sun May 31, 2015 1:01 am

Posts: 1
Just received a intune and looking for the latest update for a 05 M :lamer: agnum RT. Thanks in advance

Post Mon Jun 01, 2015 9:48 am

Posts: 55155
Location: DiabloSport World Headquarters

dut192 wrote:
Also here is the file it told me to email to the support email.

Thanks,
Dustin

load this update.
Attachments
GM_TUNES-1t02mb.ITF
(7.31 MiB) Downloaded 358 times
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Jun 01, 2015 10:54 am

Posts: 6
mikel wrote:
dut192 wrote:
Also here is the file it told me to email to the support email.

Thanks,
Dustin

load this update.


Ok Mike I will try that one my lunch break. Someone through the support email told me my software in the computer probably needs to be reset by the dealership, so they told me the soonest they can take it is thursday and its like 200 bucks. Hopefully that fixes it if this doesn't, I will surely let you know!

Thanks buddy

Post Thu Jun 04, 2015 5:41 pm

Posts: 1
2015 mustang gt 5.0 gasolin

i used intuneAn error message will pop up when you connect a Intune


Please ask for help to Tech Support

Tell us what's wrong

Complete Auto Update

Do you connect with the car and told updates[/img]
I used Windows laptops

Post Thu Jun 04, 2015 6:12 pm

Posts: 55155
Location: DiabloSport World Headquarters

please post the info.xml file from the intune drive.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Sun Jun 07, 2015 3:44 pm

Posts: 15
I now have the I-1000 DCX for my 2014 Challenger R/T after wasting a lot of time and money trying to use an I-1000. After updating the software by running inTune.exe, I connected it to my Challenger, and was notified that the device needed updating, which is what I had just done. What I've done so far, and the problems I'm having are posted here: http://www.diablosport.com/forum/viewtopic.php?f=57&t=46480&p=283133#p283133

I assume that updating it on a Mac requires dragging and dropping files, but exactly where do I put the files, and which files do I need? My inTune appeared to have the proper files in it when I verified which files were installed. So, when I connect it to my Mac, two USB drives appear (DiabloSport & INTUNE) on my Desktop, and there are folders in the drives. How do I know if my device is registered, and if it isn't, how do I register it? How do I update it on a Mac if that is what it needs? Also, I am going to have a custom tune written for me (I'm getting a ton of engine codes because of my mods), so once I have the tune, where do I install it?

Thnx!
Attachments
info.xml
The info file for my I-1000 DCX
(1.78 KiB) Downloaded 212 times

Post Mon Jun 08, 2015 11:05 pm

Posts: 1
I'm sooo confused.
I just wanted to update my Intune. It shows :
GM Tune Db: 1r01n

I thought I could just plug it in and update it, but there's so much information, I have no Idea what to do!?
The website wouldn't let me log in, but I looked back in my email history and it shows where I registered. I had to re-register. It said my email did not exist in the system.
I don't know what to do now. :shock: :punisher:

Post Fri Jun 19, 2015 10:51 am

Posts: 2
info.xml
(2.13 KiB) Downloaded 196 times
my intune keeps asking for pcm calibration update, 2010 challenger srt8

Post Tue Jun 23, 2015 11:49 pm

Posts: 16
After installing the boxed tunes and having a custom tune created. I go to install another tune and now i receive the "Vehicle is not supported, contact DiabloSport"

09 Challenger RT I-1000 inTune

Post Wed Jun 24, 2015 7:34 pm

Posts: 1
I just received my InTune, the update progress is very vague for Mac. I updated the GM tune (which is what I have), but what else do I need to update? And how do I register?
Attachments
info.xml
(1.07 KiB) Downloaded 210 times

Post Mon Jun 29, 2015 1:57 am

Posts: 8
Also can't do any updates on my intune. need to register it but can't seem to get that figured out.

info.xml below
Attachments
info.xml
(435 Bytes) Downloaded 227 times

Post Mon Jun 29, 2015 4:46 am

Posts: 2
Hey guys tried plugging in the device to my challenger and it says PCM needs and update. What do I need to send in order in order for this to be fixed.

PreviousNext

Return to Mac/Non Windows based issues