I got a new Intune I2 and tried to connect it to the car. Ram 1500 2016 with modified PCM
After loading the updates from ignition update software i went to the car and start the tune. At writing calibration update the car show me to press clutch and start fob in the evic and at the intune nothing works.
Now the intune is in Recovery Mode and the car did not start anymore.
The support guy did with me a "force restore" but this will not help. At the end he want me to give the PCM to a reflash.
Is this the only way to get my car running again?
Calibration Update failed
Moderator: sohfast94
Calibration Update failed
You do not have the required permissions to view the files attached to this post.
- mikel
- Posts: 57793
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Calibration Update failed
if the device will not recover it we will likely need to get it in yes.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com