Advanced Tune/Modify Tune

[woods95662]

Ok thanks.

[woods95662]

Mike it's been about a month. Any progress?

[mikel]

can you grab a pic of the screen where it shows the button grayed out?

[mikel]

can you try this process:

Click on: ->Advanced Tune->Install Standard Tune->Select Power Level->Read ECU if not already read->Modify Parameters

and tell me if its lit up at that point?

[mikel]

or load this updater to the i2 drive and let it import the file then let me know if the params show up.

[woods95662]

Pic attached.

I don't have "select power level or Read ECU per this ->Advanced Tune->Install Standard Tune->Select Power Level->Read ECU if not already read->Modify Parameters

How do I download that update and put it on the device?

[mikel]

copy it to the i2 drive and the device will import it from there.

[woods95662]

Install worked but modify parameters is still blacked out.

[mikel]

Install worked but modify parameters is still blacked out.

load this to the device then see if the params show up please.

[woods95662]

That file didn't fix the Advanced Tune/Modify Tune button. It is still blacked out.

After tinkering with this device some more here's the conclusion I've come up with. It will not allow me to modify the tune for the canned 87, 89, and 91 octane tunes. If I select Modify Stock Tune it will allow me to modify parameters of the factory tune if I flash back to it. The only other tune it allows me to modify parameters for is the Diablo Tune which contains similar modification options as the Modify Stock Tune. Bottom line is those are the only (2) tunes that allow me to make changes and the Advanced Tune/Modify Tune button is never available for use regardless of what I choose.

I'd like to modify 87, 89, and 91 octane tunes as they are already setup with good shift pressures and torque management. My issue with those tunes is the fan temp settings. They are set so low, I'm guessing around 190', my fans never turn off. The truck has always run right around 208 as they all do from the factory. On a 50 degree day driving on the freeway my fans are running. The truck runs at the temp it always has and I know it is not a temperature sensor issue. I'd use the Diablo Tune but from what I can see in the modification menu no adjustment has been made to the shift pressure or torque management as they have in the 87, 89, and 91 octane tunes. The Diablo Tune seems to have the shift pressure or torque management in a stock configuration and I'm reluctant to start messing with them without any experience on where to start.

[mikel]

ok, how do you modify the tune (diablo/modify stock) if the modify parameter button is grayed out?

We are having a tough time determining exactly what it is you are seeing and we are unable to replicate it thus far.

[woods95662]

Can I send you a video? I think it's the only way we'll be on the same page.

[mikel]

sure, post a link to it here.

[woods95662]

This thing never notifies me when you respond. Download the video here.

https://www.dropbox.com/s/j8zk7y212v6nl ... 7.mp4?dl=0

[mikel]

its all there.
You were in the modify parameter menu after you clicked on the diablo tune, thats exactly what you are looking for.
You just need to select the tune you want to modify before the option will appear.