Board index Trinity 2 T2 for Dodge/Chrysler/Jeep/Ram Ram 1500 E fan swap.

Ram 1500 E fan swap.

This area of the forum is for discussions relating to the T2 monitor/tuner on Chrysler vehicles.

Moderator: sohfast94

Post Wed Jun 13, 2018 11:12 am

Posts: 16
I am about to do an efan swap and delete the clutch fan on my 16 ram 1500. My question is what temp should I set the fan to cut on at with the stock thermostat. I know factory is 222 degrees but that is just to cut on the small a/c fan to help the clutch fan.

Post Fri Jun 15, 2018 1:49 pm

Posts: 53704
Location: DiabloSport World Headquarters

you wont have control of it I wouldn't imagine.
Post your backup and I can look at hos the file is set up to see if the efan can be enabled.


Thanks
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Sat Jun 23, 2018 10:00 am

Posts: 16
It can be done through my custom tune but should I be able to control it with the tuner? I have an ECT fan option. Also I do not have disable traction under quick adjust like I use to have. I updated it and now its gone. I included the backup for the fan adjust and will also post the info.xml to see where my quick adjust options. Thanks in advance.
You do not have the required permissions to view the files attached to this post.

Post Mon Jun 25, 2018 8:30 am

Posts: 53704
Location: DiabloSport World Headquarters

you'll want to post the last tune written so I can edit that file.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Jun 25, 2018 9:55 am

Posts: 16
Is that to adjust the fan or the traction? They seem to be able to control the fan and the traction via custom tune. I just wanted the traction disable under quick adjust again so when I cycle the key it is enabled again. Is that possible? They have the fan set perfect now via my custom tune.

Post Mon Jun 25, 2018 10:19 am

Posts: 53704
Location: DiabloSport World Headquarters

I'll need to look into the TC disable, nothing has changed there so it should still be there.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Jun 25, 2018 10:25 am

Posts: 16
Not sure what the deal is it only shows tires under quick adjust. I’m hoping I can get it back soon. Kinda main reason I got it. All was good until I updated to 8 speed support. Initially it did it on my t1000 and carried over to the t2 when I switched to it.

Post Mon Jun 25, 2018 12:37 pm

Posts: 16
ok here is the last tunes written. Currently in the truck.
You do not have the required permissions to view the files attached to this post.


Return to T2 for Dodge/Chrysler/Jeep/Ram