"This Vehicle Needs an Update Download Here.."

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

User avatar
j.mike@diablosport
Posts: 126
Joined: Mon Nov 23, 2009 11:44 am

"This Vehicle Needs an Update Download Here.."

Post by j.mike@diablosport »

DCX Vehicle Update Instructions for Trinity

Follow these instructions if you get the message on your Trinity that reads: “This vehicle needs an update Download here: www.diablosport.com/dcx " and your tuner is already on the most current revision. This message is displayed because the tool wants to update the vehicle’s stock calibration file, not necessarily because the Trinity itself needs an update. We have configured the Trinity to be able to run the same update function as a dealership’s equipment, so that you do not need to bring it in to them when the update is required. However, the tool’s firmware (the software that controls it) may still need an update first.

To determine if the tool’s software is current, boot it up by plugging it in to power, and select OPTIONS/SHOW INFORMATION. The revision of the software the tool carrying will be displayed next to ‘Version’. Compare this to the most recent revision on the Downloads page for your Trinity to see if the unit is current. If it is not, first follow the ‘Trinity Update Instructions’.
The DSDownloader/Trinity Driver program
These should both be installed and ready on computer, assuming you are on the same PC that you used to register your Trinity. If it does not, once again, go to the Trinity Downloads page to make sure that your tool is up to date and registered.

Uploading the Calibration Update
1. Connect the tool to the computer with the power and USB/Serial cables.
2. Open the DSDownloader program and under ‘Options’ make sure there is a check mark next to the line that says “Auto Connectâ€
Attachments
Trinity Update Instructions_NEW_5_11_10.docx
(46.07 KiB) Downloaded 1906 times
DCX Vehicle Update Instructions for Trinity.docx
Download as Word File
(19.27 KiB) Downloaded 3107 times
Last edited by j.mike@diablosport on Thu Jul 15, 2010 3:51 pm, edited 2 times in total.
mopar469
Posts: 1
Joined: Thu Jul 15, 2010 9:22 am

2009 Challenger needs "AG" flash and current is &q

Post by mopar469 »

According to my tuner, I need a flash on my 09 Challenger R/T to a "AG" flash, and the current flash that is in the car is a "AE". Any help with this?
User avatar
06MonteSS
Posts: 17964
Joined: Tue Jan 23, 2007 11:33 am
Contact:

RE: 2009 Challenger needs "AG" flash and current i

Post by 06MonteSS »

ummm... follow the instructions ^ ^ ^ ^ go to the dcx site/link.... all the info is up there ^ ^ ^ and over at the dcx link...
06MonteSS / DiabLew Tune
Image
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
User avatar
FGorhau
Posts: 20
Joined: Wed Apr 28, 2010 11:58 pm

RE: 2009 Challenger needs "AG" flash and current i

Post by FGorhau »

Guys,
The dealer re-flashed the PCM on my car today. I tried to E-mail you the JPGs of the workorder for proof at the address posted above (support@diablosport.com), but I got delivery failures. Can't attach the JPGs here, evidently, either...

You have an E-mail address I can send the proof to?
---------------------------------------------------
You bet your ass it's got a HEMI!
User avatar
06MonteSS
Posts: 17964
Joined: Tue Jan 23, 2007 11:33 am
Contact:

RE: 2009 Challenger needs "AG" flash and current i

Post by 06MonteSS »

click the POST REPLY button at the bottom left, and you can attach the file...

dunno why you had an issue with support@diablosport.com tho... interesting...
06MonteSS / DiabLew Tune
Image
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
User avatar
Vas@Diablosport
Posts: 1086
Joined: Tue Apr 15, 2008 9:17 am

RE: 2009 Challenger needs "AG" flash and current i

Post by Vas@Diablosport »

Our support@diablosport.com email is and has been up and running. You can also fax the documents to us at (561)908-0048.
No, i don't work here.
User avatar
FGorhau
Posts: 20
Joined: Wed Apr 28, 2010 11:58 pm

This Vehicle Needs an Update Download Here...

Post by FGorhau »

Here are the documents the dealer gave me... the re-flash is on page 2

Thanks, and I'll be calling right after I send these...

Frank
Attachments
Page 1
Page 1
Dodge001.jpg (333.57 KiB) Viewed 30819 times
Page 2
Page 2
Dodge002.jpg (189.39 KiB) Viewed 30819 times
Page 3
Page 3
Dodge003.jpg (195.01 KiB) Viewed 30819 times
---------------------------------------------------
You bet your ass it's got a HEMI!
User avatar
FGorhau
Posts: 20
Joined: Wed Apr 28, 2010 11:58 pm

RE: This Vehicle Needs an Update Download Here...

Post by FGorhau »

Apologies to all... didn't know these images would post super-sized...

I tried the E-mail again, and it appears to have gone through this time...
---------------------------------------------------
You bet your ass it's got a HEMI!
toofart
Posts: 17
Joined: Thu Jun 11, 2009 3:23 pm

Re: "This Vehicle Needs an Update Download Here.."

Post by toofart »

j.mike@diablosport wrote:After the Calibration Update is complete, you can continue to flash the tunes that are built into the Trinity.
For those who have a CMR tune, updating the Calibration would render our CMR tunes useless, right?

If that is correct, how can I return my Trinity to an older rev, like 1r04 ?
User avatar
06MonteSS
Posts: 17964
Joined: Tue Jan 23, 2007 11:33 am
Contact:

RE: Re: "This Vehicle Needs an Update Download Here..&q

Post by 06MonteSS »

huh??? going back to a previous trinity revision does nothing for you, heh...

once the engine calibration has been updated on the pcm, you have to have the custom tunes recreated by your CMRtuner, using a copy of the new original backup from that pcm calibration update...
06MonteSS / DiabLew Tune
Image
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
Pappy
Posts: 1
Joined: Sun Aug 07, 2011 8:31 pm

RE: Re: "This Vehicle Needs an Update Download Here..&a

Post by Pappy »

I have just purchased a Trinity for my 2010 ram 1500 5.7 HEMI and i dont understand how to find the best tune for my truck. I have a volant CAI could this cause any problems. Help please
User avatar
Speedy!
Posts: 48
Joined: Fri Jun 04, 2010 4:32 pm

RE: Re: "This Vehicle Needs an Update Download Here..&a

Post by Speedy! »

I just got a Trinity. It seems to auto update when plugged in to a PC and DSDL launched.

Since I have a custom tuned car, is there a way to prevent that? I may not be able to always bug HemiTuner to update Calids and what not so my tunes will work.

Also, if it does update automagically, can you just point to the old crom (saved it on my PC) and revert to avoid the calid issue?

Would be nice if the Trinity had a "roll back" feature.

Do those of us with custom tuned cars gain anything from these calid updates?
-Speedy

Image
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

RE: Re: "This Vehicle Needs an Update Download Here..&a

Post by mikel »

it will not auto update when married to a vehicle...
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
User avatar
Speedy!
Posts: 48
Joined: Fri Jun 04, 2010 4:32 pm

Re: RE: Re: "This Vehicle Needs an Update Download Here

Post by Speedy! »

mikel wrote:it will not auto update when married to a vehicle...
COOL! Thanks for the info.
-Speedy

Image
User avatar
molier
Posts: 29
Joined: Wed Nov 07, 2012 11:04 pm
Location: Texas

Re: "This Vehicle Needs an Update Download Here.."

Post by molier »

Have a 2011 MOPAR 11 and just got the Trinity tuner. installed the DiabloSport Downloader 2.2.2.6 from the CD onto my Win 7 64bit and it see's the trinity.
The issue I have is the Trinity does not have 2011 Dodge listed..... Only Demo, cadillac, Chevy, Ford, GMC and Other/ Not sure!

Any suggestions?

Thanks in Advance,
mike
MOPAR 11
Post Reply