PCM Calibration update needed error

Post any issues or questions regarding the inTune auto updater application, or any PC related issues here.
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

PCM Calibration update needed error

Post by MAK89 »

I was trying to see if there was any updates for my Diablo Sport DCX tuned for a 2012 Durango 5.7L. Software updated when plugged into the computer as there was new software. Went to update new settings to Vehicle and keep receiving the same message that PCM calibration needs update. Removed and plugged back into computer and no updates were found. Plugged back into vehicle to install and received the same message. Tried to reset back to factory setting and it wouldnt allow me to do it.

Not sure what else to do and I am hoping that somebody can help me... Please
Attachments
info.xml
(1.98 KiB) Downloaded 866 times
conductortroy
Posts: 2
Joined: Thu Sep 18, 2014 8:55 pm

Re: PCM Calibration update needed error

Post by conductortroy »

me too any info
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

Re: PCM Calibration update needed error

Post by MAK89 »

Not yet. Still waiting on help from Diablo. First time I have used one of there runners..
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: PCM Calibration update needed error

Post by mikel »

MAK89 wrote:I was trying to see if there was any updates for my Diablo Sport DCX tuned for a 2012 Durango 5.7L. Software updated when plugged into the computer as there was new software. Went to update new settings to Vehicle and keep receiving the same message that PCM calibration needs update. Removed and plugged back into computer and no updates were found. Plugged back into vehicle to install and received the same message. Tried to reset back to factory setting and it wouldnt allow me to do it.

Not sure what else to do and I am hoping that somebody can help me... Please
the device is not requesting an update and is married to your vehicle, has it been to a dealer since you last tuned it?

Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

Re: PCM Calibration update needed error

Post by MAK89 »

It was at the auto body shop after it was in an accident, but I don't think they did anything to it but i could be wrong. It was the first time I updated the tuner since purchased as I didn't know if it needed updates. Is there something I can do to reset it back to original settings now that there was an update. Maybe a sequence I can follow to marry the tuner back to the vehicle if they did change something while in the shop.
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

Re: PCM Calibration update needed error

Post by MAK89 »

MAK89 wrote:It was at the auto body shop after it was in an accident, but I don't think they did anything to it but i could be wrong. It was the first time I updated the tuner since purchased as I didn't know if it needed updates. Is there something I can do to reset it back to original settings now that there was an update. Maybe a sequence I can follow to marry the tuner back to the vehicle if they did change something while in the shop.
Would be nice if the people that you buy a product from help with support when it doesn't work.
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: PCM Calibration update needed error

Post by mikel »

try to restore the stock tune to the vehicle and tell me what it says when you do that please.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

Re: PCM Calibration update needed error

Post by MAK89 »

I tried to reset to stock setting stored on my DCX and it says the same thing. That the PCM needs to be updated. Plug into PC to instal update. But there is no update.
Attachments
IMG_0389.JPG
IMG_0389.JPG (1.9 MiB) Viewed 17933 times
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

Re: PCM Calibration update needed error

Post by MAK89 »

MAK89 wrote:I tried to reset to stock setting stored on my DCX and it says the same thing. That the PCM needs to be updated. Plug into PC to instal update. But there is no update.

Sent in what my programmer says when trying to reload original tune. still waiting on help. not sure what takes so long to get answers.
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: PCM Calibration update needed error

Post by mikel »

please post the info.xml file from the intune drive.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Cwffwc
Posts: 1
Joined: Mon Dec 19, 2016 5:26 pm

Re: PCM Calibration update needed error

Post by Cwffwc »

I am a new user. I am having the same problem: "the PCM needs to be updated. Plug into PC to install update. But there is no update." A previous post reply asked for the XML file on the intune drive. The following is what is on my inTune drive.

Please help !!!!

Frank

<?xml version="1.0"?>
-<tool_info> <main svn="9115" sw_rev="1r04j" full_version="InTune-1r04j 03/14/2016 10:51:37 AM"/> <registration status="1" sn="KUD7VEC-8"/> <cal_id CM1="05150729AEke3z0" PCM="05156128AG"/> <restore bc="0" vin="2C3CDYBT7CH227892" id="0"/> <system_db vin="1r01g" dtc="1r01a" info="1r01b"/> <db pid="1r01b" tune="1r01v" mfr="DCX"/> <db pid="1r01b" mfr="FORD"/> <db pid="1r01a" mfr="GM"/> <license tuned="0" avail="1"/> <unsupported vin="2C3CDYBT7CH227892" oem="DCX" calid="05156128AG"/> <updates count="10"/> <oem tool_oem="DIABLODCX"/> <reg reg="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"/> </tool_info>
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

Re: PCM Calibration update needed error

Post by MAK89 »

If you look at the initial post I have posted the file there as I read on someone else's post that you would require it. So I thought I would add it on my first post so that you could see what was happening.
Attachments
info.xml
(1.98 KiB) Downloaded 802 times
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

Re: PCM Calibration update needed error

Post by MAK89 »

Ok. I posted my info Tuesday as you asked for it Monday an it is now Thursday. How long does it take for anyone to look at my file and figure out why I cannot instal the original tune or why the new update keeps saying that I need to update PCM when there is no update.
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: PCM Calibration update needed error

Post by mikel »

MAK89 wrote:If you look at the initial post I have posted the file there as I read on someone else's post that you would require it. So I thought I would add it on my first post so that you could see what was happening.
you must have been updated by a dealer as it is still asking for an update despite being married to your vehicle.
Give us a call and we can reset it for you.

Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
MAK89
Posts: 11
Joined: Fri Dec 09, 2016 9:23 pm

Re: PCM Calibration update needed error

Post by MAK89 »

Ok will do. What would be the best time to call and number?
Post Reply