Pcm swap issues

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Reply
AggThrd17
Posts: 2
Joined: Sat May 25, 2019 11:28 pm

Pcm swap issues

Post by AggThrd17 »

I ordered a unlocked pcm to go with the new Trinity tuner for my 2017 Dodge Charger RT 5.7. After i got the new pcm swapped in the car will not start. The display shows the push brake and push to start but nothing happens when I push it. Im thinking the pcm isnt correct or something. I swapped back to the original pcm and it works as it should. Am I the only one to have this issue? :( :(
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Pcm swap issues

Post by mikel »

Certainly not common....
Can you try again and verify the connectors are properly seated, etc?
If it still wont start give us a call so we can attempt to verify the VIN, etc.


Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
AggThrd17
Posts: 2
Joined: Sat May 25, 2019 11:28 pm

Re: Pcm swap issues

Post by AggThrd17 »

I got it figured out. I ended up having to unhook both terminals of the battery for 5 min and then hook up the new pcm. It fired right up after i got it installed.
Post Reply