Board index i2/i3 Technical discussion i2/i3 for Dodge, Chrysler, Jeep and Ram Saw PID Unlock

Saw PID Unlock

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Mon Oct 07, 2019 12:07 pm

Posts: 30
So I see a PID that says number of flashes since unlock. Does this mean that the PCM is Unlocked?

Post Mon Oct 07, 2019 12:21 pm

Posts: 55372
Location: DiabloSport World Headquarters

where do you see this PID??
Was your pcm sent here to be unlocked?
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST

Post Mon Oct 07, 2019 4:01 pm

Posts: 30
Car is not home right now...but under live with dataviwer open and i3I hooked up I saw this pid.

Car was at dealer recently and they hooked up and left running for about a half hour. I could not get a straight answer as to what was going on. Maybe curious about some data that the car had on board.
10 to 20 below ambient intake temperature readings recently when I was doing some testing.
So when I got home i hooked back up to i3 next day I did see that.
No i did Not send my PCM into you for unlock.

Post Tue Oct 08, 2019 8:53 am

Posts: 55372
Location: DiabloSport World Headquarters

Im not sure what you were seeing, but your pcm is indeed locked if it hasnt been sent in to be unlocked.
Mike Litsch
Powerteq Customer Service Manager
Diablo Tech support by phone:
561-908-0040x4
M-F 8:00 AM to 5:00 PM EST


Return to i2/i3 for Dodge, Chrysler, Jeep and Ram