could things come to mind here. first of all are you running the updated plugs preferable a NGK 6510 with the gap closed down to .028? the fact that it does it on the stock tune bugs me. these were bad about the intercooler filling with oil and also the intakes filling with oil from the crankcase ...

Hello Diablosport. I have a diablo intune2 and a 2016 mustang GT
I noticed you have tune files for a couple different cold air kits in the device
I run a Injen cold air intake was wondering if you would be interested in some datalog files from the track with your 93 octane tune and that intake so ...

hey there. so it ran good on the 91 tune with the excdption of the limp mode/ cel correct?

i dont have a curve for the series 3 truck intake. but this should be close. load this in there and let me know

ALSO, pleas plug the tool into your computer and run the ignition software/ i need it to up load the vehicle files

also, what were you doing when it threw the code.

interstesting. that first code is for a underboost meaning its making less boost than is being commanded. let me dig on this a min and i'll send you an update.

here you go. load this into the truck and should take care of it

never mind. found your ermail. im emailing you now

hey buddy could you email me directly so i can get this resolved for you? [email protected]

here you go

this is an odd one. first IF it throws a wrech light you can pull over and turn it off and turn it back on again. no need to limp it home. however, second thing you can do is pull the plugs and make sure they are ok (50,000 is some miles) and possibly put fresh ones in it and/or at least close the ...

just looked at this file. this still isnt my custom tune. the file you attached (which is the tune that went into the vehicel) does not have it disabled vs my tune does.

are you going to: tune vehicle > advanced tuning > custom tune > and selecting the custom tune i sent you? then selecting "apply ...

ok i see what happened. i set this to 0 (off) in the custom tune. but when you are loading the tune the adjustable parameters are setting it back on. take the file i made you, rename it to something else. and drag and drop it onto the tool. and let it inport. when you go to load the custom tune if ...

can you post up the new "last tune written" out of the "tunes" folder please. i want to see if what i changed is actaully getting written in.