i don't think it a diablosport issue..
autozone loans fuel pressure gauges.. try taping to the windshild and do a pull... my guess is your fuel pressure is dropping.. (weak pump, bad o ring etc..)
that would also explain the hard start and popping under load (aka lean)

can someone explain how this works..

here is the situation
-lines are connected "stock" from compressor cover to solenoid to top of wastgate , 3bar if that matters
-just driving around the "turbo waste gate duty cycle - turbo wg dc" is 0
-at wot 1st gear turbo WG DC is about 60 %
-in 2nd gear WG ...

mike, it worked!
(after applying fix rebooted a couple of times and then i used to update agent.. )
thank you!

deleted the group file in the "g:" drive, rebooted and tried again but failed.. no group_update file but its still complaining about one..
also tired on the device, settings, advanced, clear all updates -- response "clear all updates done".. same problem
screen shots
thank you
steve

sorry about that...
updated it yesterday still doesn't work, here is the info.xml

Hi Mike
failed.. current firmware 1r03m cannot be replaced by ....
screen shot attached.
Thank you
Steve

i've configured the intune (updated today), 2 analog ports (afr and oil) but they don't show up under the dataview external tab..
attached
info.xml
screenshot of dataview
thank you
steve

my car almost stalls at red lights and otherwise drives fine
when adding 50 or 100 rpm idle to the tune, WITHOUT MY FOOT ON THE GAS idle continues to climb (see attached video) till 3500 when i have to shut it off..
i2 is up to date

video attached
info and tune attached too.

suggestions ?
Thank ...

The first time Mike L fixed a problem with the rev limiter, my tuner had it set at the default of 6k (field was populated with 64000), and Mike L updated it to 7000 for me
this time the problem was with idle speed, i want to change it from the default of 800 to 1000 (because it occasionally would ...

Thanks Mike
The first time i tried writing the load hung at 73% and then the i2 rebooted all by itself.
the car would not crank (security light on)
upon reconnecting the i2 it went into a recover and loaded the "backup" tune successfully.

living dangerously, i was able to take a backup, load the ...

Hi
My i2 freezes when opening (modify) the idle (both AC and NO AC) p/n on my SRT4, looking for 1000 rpm idle

(i2 updated today and it didn't help)
xlm and last written tune attached
Thank you
Steve

PS.. i've had other problems with this tune, couldn't change the red line RPM to 7,000 and Mike ...

sounds good.. i'm running a 180 thermostat instead of the 195 stock

Hi Mike
Thanks for fixing my 7k rpm limit.. i tried to change the cooling fan temperatures when i was at the track but the unit just freezes when its selected
i've renamed the tune you provided and otherwise unchanged..
thank you

since you have the code.. did you try a force restore (menu: advanced ....) ?

Mike
Thank you, works perfectly..

Since this is the 2nd problem i've had with custom tunes that you were able to fix..

Is there any trick i should be doing or my tuner to prevent this in the future..

Thanks again!!

mikel wrote:

fixit wrote:Hi Mike
attached is the last tune written

should rev to 7k here.