Ok so I crank up the crank fuel by 30% and that did it..
Cold start this morning was good
Thank you for your support.
MB

On cold mornings like today I get a very long crank before it starts its lean!
I look up cranking fuel in the tune its at stock settings,
What do I change to help this cold start lean condition?
Cranking fuel is in functions, scalars and tables Where do I make my changes,
and by how much? Or am I ...

How do I calculate airmass displacement of 1 cylinder?
Also my intake manifold volume?
04 cobra AMZ1
Mods 2,3 whipple long tubes
id 1000 inj.
SCT 3000
Signal blade T B
Return style fuel system set at 40 psi at idle vacuum line off..
Thank you for your help
MB

Can you send me a start up tune file for our new 347 build? A9L Computer 10.1CR
TFS Heads Holley system max intake.
Long tubes
comp cam XE282HR 1.6 roller rockers PRO M 75 MM MAF AND 75 MM TB 30 LB Injectors
3.73 GEAR
Thank you for your help
[email protected]

Can you send me a start up tune file for our new 347 build? A9L Computer 10.1CR
TFS Heads Holley system max intake.
Long tubes
comp cam XE282HR 1.6 roller rockers PRO M 75 MM MAF AND 75 MM TB 30 LB Injectors
3.73 GEAR
Thank you for your help
[email protected]

Ck the pcv hose,they get soft and leak where it hooks to the lower intake.
Cause codes p0171 p0174
Good luck

MB

Got what i needed
Thanks any way.

Need ori file for cmr
2007 ford f 150 5.4 3v
Proc # (rxdg3a3)
Thank you

2007 f 150 5.4 3v
Need ori file for computer code (rxdg3a3)
Thank you

I am trying to load .cry files for use with a Revolution Chip. Is their a translation program to turn .cry into .frg?