So I've still been waiting for the fix for some time now and it's only gotten worse, that p0601 code isn't fixable I've talked to shops and they said it's a bad pcm, which make sense why it's got worse, only had the PCM for 5-6 months supplied from you with the i3 platinum and pcm swap and really ...

mikel wrote:theres a wifi bug were working on, please use a pc and update agent for now if possible.

okay are you able to force cal update with it plugged into laptop and running update agent?

no after the last update i tried to connect to wifi and not it freezes for a couple minute then it has blank list of wifi networks

OK, this one is fixed.
I should be able to do this all automatically.

1. return vehicle to stock/original backup
2. Update device, it should force it to do a calibration update
3. Go to vehicle and click tune menu and it should prompt to go back and check for an update.
4. Update again to download ...

OK, this one is fixed.
I should be able to do this all automatically.

1. return vehicle to stock/original backup
2. Update device, it should force it to do a calibration update
3. Go to vehicle and click tune menu and it should prompt to go back and check for an update.
4. Update again to download ...

So it was said back in May there would be a fix for this issue soon. It's now August and I just updated my i2 yesterday and tried installing a tune and the same code is coming back up so I had to go back to installing the bandaid custom tune that disables this code. When can we expect this issue to ...

copy this to the root of the drive and let the device import it then you can load the custom pcm tune and it should be fine.

even after the updates and till throw P0601 when i change tunes other then that custom one u made to turn off that code, something is wrong with the pcm that diablosport ...

mikel wrote:copy this to the root of the drive and let the device import it then you can load the custom pcm tune and it should be fine.

It got rid of the CEL but this seems like just a bandaid fix and not a permanent fix, like now when i change tune it going to still pop up with the P0601 code

mikel wrote:please post the file called last tune written from the tunes folder on the i3 drive.

okay i uploaded each of the last tune written files

Yes my i3 was updated and had this issue. Was just saying that after setting truck to stock, getting it back from dealer, and updating tuner...these are the problems I have now. I think somehow all the stuff on my i3 was removed. It has no tunes and won’t connect to truck.

I got my a new ...

A week and half ago did an update on my i3 platinum which has work with out a problem till now i have a 2017 ram 1500 with an unlocked pcm, the problem was after the i3 updated it said some ecu not supported and would on read the TCM, today finally got technical support on the phone they send a new ...

[quote="In5ane"]Gotcha...thx for the info! I started having all the issues after the dealership did two software recalls/updates during an oil change. I had removed the custom tube and reloaded stock before I took it in. Maybe it was the dealership sw update?![/quote

My update was for the i3 tuner ...

I have updated my I3 multiple times, and it still has none of the canned tunes. Additionally, Ignition Updater says "Unsupported File for Calibration, Contact Technical Support." I have attached Truck is a 2017 Ram, and I have attached the info.xml file...

I got the same problem after an update ...

Had same problem with the message popping up after my update on my i3 today on my 2017 5.7 1500 i have a unlock pcm and have loaded tunes before and now it it only comes up with TCM and i need to tune the ECT for my my Efan conversion
let it update the pcm then you'll be ab le to tune both pcm and ...

It wouldn't even show the pcm, i just checked my i3 and it had an update so it updated and ill try in the morning