I have this crom installed on my predator from quite a while ago. Now I see one with a new date. Should I update reflash to this one? Are there any changes or just a date change?

More logs. I changed the number of pid's open and got back the LTFT 1 and others. Will the system limit the amount of info available? What causes this? The runtime log is one that froze up during logging.

Here are the details. Runtime 18 is the file after "Re-QueryVehicle Info" Runtime 19 is the log after it froze up. After this function the PID's were stilll not available. I ran a log with just the Predator connected and it showed the LTFT, STFT & ECT with the same connection.

As far as the ...

Yes, it worked with all the pid's showing and working then the last 3 times it shows the pid but no data displayed ECT, LTFT Bank 1 and STFT Banks 1. It is like the sensor is not hooked up, but I can see it if only using the datastream from the Predator without the laptop connection. The only thing ...

U7193 9r11, DW 3.3.0.7 Win7 x64 USB to serial to laptop. I used to have ECT, LTFT 1 and STFT1 but now I show the pid but no values or response and of course after saving the file they are missing. This along with the intermittent failure of the log freezing up. Here is the runtime data

Info ...

Here is another runtime log. I have since last time downloaded 3.3.0.7 since I noticed I was using 3.3.0.6. It worked OK for 2 days without freezing but today the gremlin has come back. Thanks for your help !!!

Just a note I noticed today while trying to log before the file stopped. Worked well until I went to or just after WOT mode. Seems to me the other day the same result after WOT. Also I am using DV 3.3.0.7. Tried to load 3.3.0.5 but could not get a link. Thanks

Try this one and see if this any better. I did not open anything after the shutdown. The log only ran a few minutes this time.

No issues with logging on the predator, everything works fine for the full length of the log. This particular log has no issues as I can see the whole thing until it stops. ???

Will this be available for Predators also? Which ones will be enabled?

Here you go... I believe this is the correct file.

Dataviewer 3.3, Win 7, 9r11 crom.
When logging on a laptop the program locks up with no notice or reason. Reboot and it is OK again. Any ideas?

If you want to improve your 1-2 shift opt for the 'Vette servo. Improves the shift and you can lower your pressure. You can find it on the net or eBay. Around $10-20. Only for the 4L60E series transmissions though.

Has anyone determined what is the best AFR for WOT? I know there are many variables s to temp, BP etc. but in general terms where to be. Can you look at these logs and see if there is any improvement available. tune is for 08 SRT Challenger with 93 CAI tune 9r12 crom. AFR wideband file included ...

7193 was not usedon the 03 models until the update to 9rxx. '03 used the 7195, that is why it will not work on your truck. You need to send it in for the update to work.