I purchased an used Trinity for my ram. I cannot update the Trinity with the computer. It is unmarried and functions properly. I cannot locate the dsdownloader program. It all redirects to the Ignite program. I’ve followed every step and check and cannot update. I’ve tried different cables and the ...

is there a way to change those settings? Seems the thershold for this is way too low.

Did a few test runs to dial in my AFR today and found this out. I can get it pretty much nailed to 12.2 AFR but at WOT once it hits third it starts dropping to 9.5? Why? This is in the 300 to 500rpm range. Any suggestions?

Will this also help the rev issues in the 07-08's?

Try connecting the sensors without the extensions. I had enough play on mine that I didn't need them as mine is an 08 also. The extensions my have a short in them. Try cleaning the connectors alos. I was carefull with my sensors too but I replaced 2 of them. Seemed to help. I might of bounced them ...

any ETA for this?

Did you cut the o2 sensor wires to extend? That has caused many of those codes.
Also you'll need rear o2 sims to trick the computerfor the hiflow cats. Do you have an air fuel guage? Adding all that might of actually leaned it out. I was get p0153/63 slow response codes but it took about 500 miles ...

How are we making out the proper adjustability of the rev limits for these years. I can max out the rev which still only allows +600 but from what base? I can max it and sent my shift rpm to 6100 but it bounces the rev limiter at WOT every time. Makes the shift feel like double clutching! Also is ...

I have the same issue also. As with my 08 I can only raise the rev limiter +600!! Why can't we have like the older years. If I set my shift poits to 6100 it screws things up. I looks like it bounces off the rev limiter prior to the shift. This is part of the poor shifting with our modded trucks ...

Also is there a way to pick the PID's from the tool in the viewer? Seems I can't find all the PIDs the tuner has requested.

PRatio
Actual SPK Cyl 1
KNK Total Retard

There is 2 PRatios one an EGR another in MAP?

Help please

OK, got it working now. I am using the 7137 with crom 4. Has there been any updates to the shifting yet, my 08 ram still seems to have a bog at the shift. Very slow upshifts.

How do I pull the recorded log off the Predator to the computer? I am having no luck! Help

I see you have no cans listed for the Rams? are you making one or which one would be easiest to modify from the rams?

I've read in some topics that there is a crom 9.05 and 06 out but the support files only list the 9.04? I am looking for better tranny shifts as my 08 feels like a manual! There is a lag in the WOT shifts. Part and 3/4 throttle it shifts fine.

Same here guys, the upshifts seem better but trying to downshift this pigs is terrible. I'm still trying to get rid of the split second no throttle at WOT shifts. Seems like I still have a ton of TM on my 08.