By his description it sounds like he has the same setup as I do, and I get the same results.

I have a 2005 SRT4 with Stage 2 w/o Toys, Mopar CAI, and Mopar Cat-back exhaust with the stock CAT installed.

Since I first purchased my Predator this year in Feb I could make my boost spike well past 20 ...

Hi folks,

I came across this document http://tunertools.com/prodimages/Innovate/manuals/Predator-Innovate-Plug-in.pdf

and this forum http://www.innovatemotorsports.com/forums/showthread.php?t=7548

Both suggest that at least in the past there was a Predator Plug-in that would work with Innovate ...

It should always be at 14.7:1 under cruise, closed loop situations.

But during open loop operations (WOT, or heavy acceleration) the value for AF ratio "should" change, right? In my case, it is not. I'll reconfirm this, but I'm pretty certain that is the case with my logging. Again, the AF ratio ...

PSI/Baro = Pratio

Yeah if you're just sitting there that should be ok.

Hi Brian,

If you are referring to the Target A/F ratio, than no, the value does not change from .07 while I'm driving around. It doesn't matter whether I'm standing still at idle or under boost at highway speeds, it reads ...

What you need to monitor is KNK ST (knock), SPK CYL 1, PRATIO, EXH TMP, Target AF.

Hi Brian,

Thank you for the information. I monitored these values as you suggested. I have a couple of questions.

1) Target AF - Mine stays at .07 which I assume translates to FA=1/.07=14.28 or so. This value ...

What do you need exactly? I'm sure I can direct you in whatever you need.

Howdy,

Well the instructions that came with the U7134 are skimpy even by comparison to the U7135 Hemi. At least the U7135 goes into custom tuning and some information on logging.

I would really like to understand the ...

Hi folks,

I have an 2005 SRT-4 with a Stage 2 w/o Toys upgrade, Mopar CAI, and Mopar exhaust. That's it. Everything is hooked up as stock and/or recommended. Running California 91 Oct gas.

Got my Predator last night and of course within 30 minutes of opening I had to install the supplied 93 Oct ...

Hi folks,

It appears that the link you have for the U7134 manual is dead (file not found). The only other link that I can find appears to be for the U7135 but this is for HEMI powered engines. Is it just the same?

Best Regards,

Landmizzle