ok well i have an 04 and as we all know diablo never got our trans stuff done like they said they would so i didnt know what could be adjusted and what couldnt.

you might try just cleaning the throttle body. 4.7 isnt drive by wire in 05 so i dont think you can asdjust your idle. i had a gmc in the shop a few weeks back and he had the same problem. i cleaned his throttle body and his idle came up and no more dying.

be careful using a pressure booster with adjustments on the predator. if you get the pressure too high it can blow out the front pump on your tranny.

I'm pretty sure I have the latest version of 9r09 cause I had to load it in order to load 9t12b so I will try going back on Monday. I was thinking that they put some TM back in also by the way it acts. It feel like it pulls real hard until right before it shifts then it shifts real fast but not hard ...

I'm not having a problem with it not locking up it just seems to loose all the torque right before it shifts, it shifts quick, and then takes a second to start pulling hard again. Before when it shifted it would chirp the tires and now it feels like the tranny isn't holding.

I didn't know if I could go back once it was updated. I agree on the trans though they should make it adjustable on all the gears for all of us. Wasn't saying that you were wrong just that we been waiting a long time for any kind of trans adjustments.

What did you guys do to the tranny as far as the rams go. I have an 04 with transgo shiftkit and since I loaded 9t12b my tranny feels really soft when it shifts. It used to chirp the tires going into 2nd now it feels like it is slipping real bad. Can you let me know whats going on or can i go back ...

i took the throttle body off my truck the other day and cleaned it with a rag soaked in brake clean. while i had it off i took some 2000 grit sandpaper and hit a few little spots that didnt seem to come clean from the brake clean and now my truck surges when it idles and some times the throttle ...

uses seperate modules for what pcm and tcm? from what i have found the tcm and pcm are in one module on the 2004 and 2005 as long as you get a NGC controller from an 05. if i am incorrect and they do have seperate modules for pcm and tcm could i swap modules and harness to make it work. will all the ...

I have a 2004 dodge ram 1500. i want to adjust my shift points but apparently diablo isnt worried about making that possible for us guys. so here is my idea and i want to know if you guys think it will be possible. I want to take the pcm from a 2005 1500 and put in my truck but cant find the pinouts ...

does the dsp change the tranny line pressure on an 04 ram? Im going to install transgo shift kit and they said if it doesnt change line pressure i can install a resistor to boost line pressure and if it does not to install resistor cause it blow out the pump.

sc has shift points and has for awhile and it doesnt cost any extra. but they dont have idle adj.

yes sc does have adjustments for shift points at wot 1-2 and 2-3 for the 04 cause i used to have one. i sold it and bought a ds cause they have adjustability for spark and fuel and claimed they were going to have shift points soon. wish they would hurry up and do it its a pain in the a$$ to have to ...

does any one know if it is possible to put the computer from an 05 ram in my 04 in order to adjust tranny options. i work at a shop and have looked at several 04s and 05s and the plugs look the same but the pins on the plugs maybe different. just wondering if anybody knew if this is possible and if ...

do the 2004 rams work the same way cause i have thought of swapping gears. I thought the 04 works off the reluctor ring in the rear end. is this correct?