I purchased a 1GB and a 2GB SD card on Amazon and they work fine.

Speedy! wrote:

mikel wrote:hmmm...question...what if you use a different type of gauge for the boost pid?

I'll try that and report back. Current gauge is a horizontal slider.

Any updates on this Speedy? What did you set your low number and high number too?

Not sure what kind of PIDS you see on your 2010 Camaro, but what I would do is invest in a real wideband like the Innovate MTX-L. That way you can see what it really reading on the guage and you can go by that instead...

I personally use an Innovate XD-16 with an LC 1 and a Trinity and I log my AFR ...

The older 3.2.0.7 can be downloaded from here: http://www.diablosport.com/CMR/software/General_Software/Data_Viewer_3207/DataViewer_3.2.0.7.exe. It's no longer supported and should ONLY be used for viewing logs recorded with older Trinity CROMs. It does not do live streaming and does not work with ...

Hey guys,

I did some pulls on a Dyno months ago and I used Dataviewer 3.2.0.7 to download the logs from the Dyno pulls I did. Well the logs looked fine and I could see the logs and the Analog input for my Wideband that i am logging. well I wanted to go back to see the logs and have found that the ...

Interesting chart man.....

Well get a nice CAI, Jet 180 T-stat and download the original backup tune (stock tune) to your computer and send it to a tuner and tell him you want a Custom tune made based on your mods man. Trust me it will be a day and night difference.

Same thing happened to me man as the Cal ID has changed. Basically send the New Original backup you just downloaded from your Trinity and send it to your Tuner. Your tuner will then have to resend your current tunes that you are using based on the New original backup you have now.

You make good point on the difference in ground potential. I will probably check my out as well. By chance did you ever take a reading of what the voltage was at the 2.5 mm male connector that plugs into the Trinity with either a Analog or Digital Multi Meter, or even a Ocilloscope? I would also ...

Wish I would have seen this thread sooner Ross! I have the exact same setup as you and Harrison and it works perfectly. My install was a breeze. The only thing different that I did was I set my LC-1 to samle at 1/12, so that it will sample a lil slower so that the XD-16 gauage and the Trinity are ...

Update: Once you make your Gauge layout thru the Logging icon, it will now be available for you thru the Monitoring Icon as well. So for example I called mine Knuckles_DCX and not it shows up in my Monitoring icon as well.

Hahaha.. This is funny you mention this and I know what the problem is. You have to use Dataviewer 3.2.0.7 in order to see the external analo inputs. Get rid the the Beta version tha you are running of the Datviewer.

Jose

I wish this would come out already. I've had it upto my eyeballs with the Trinity (and I'm not the only one). So much potential and it was never gotten right. A shame.

Hey Mike I remember I asked you about the Trinity a while ago when it first came out. So since then I went with the Predator, but ...

I wish this would come out already. I've had it upto my eyeballs with the Trinity (and I'm not the only one). So much potential and it was never gotten right. A shame.

Hey Mike I remember I asked you about the Trinity a while ago when it first came out. So since then I went with the Predator, but ...

Yeah! Gauge problem Solved.

(Still think its odd that when i add a page the Misc and Misfire options dont show up, Oh Well

Now onto how comes it drains the battery, I figured that problem was solved lol

Thanks Again!

I think you should go in the Trinity and make sure that you have the correct ...