During the holidays a Predator was found in the City of Port Coquitlam. Code on the back is U7136 and it is married to a Charger or other Chrysler product. If you have lost your unit please call PAT at 604-927-5492 at the City Works Yard.

...thanks.

Currently using Trinity t1000. Part: dcx_gas. The version is v.1t08aa. This, from my understanding, is a road test version. So is the update dcx -gas 1r08b update.crom the corrected crom version that should be installed into the trinity?
Don't want to install this and not have it working. Currently ...

Custom tune sounds good ...currently have a BFMIC on order so should probably wait until that is installed or can we just adjust for it later. Anyway my stknock and ltknock is crazy right now. Sending you a log. Whatever you suggest duster as I am at a loss. Running S1 tune right now cause when the ...

Trinity T1000/05PTGT/
Anyway I can get the boost level settings from the Trinity ? Not talking about raising or lowering boost but the actual pre set boost. Currently max I am getting in S1 boost is @15psi and with 93 oct boost is @17psi. Are these the proper settings? This would help me to ...

thanks ...those are the ones I have found also. Ambient air should be close to air intake temp.

...do you have them ...or is this a suspense story ? ...

Having read the sticky on PIDS and since there have been updates on the Trinity ... just wondering is there an Intake Air Temperature pid for the /05 PT GT ? Using a Charge Air Intake pid at this time. Using the 1t088aa.crom. Any chance this will be an r.crom soon ? Still having those gauge layout ...

OK ...this is something that should be remedied in the next update. Still getting the error message.

Ok ...so error messages are starting to pop up again on the new layout. Logs for awhile and then prompts " Do you want to save the recorded log". Worked ok for about 3 days then started with the same ol' stuff.
Will try re doing it.

Using Trinity with latest crom update all other info. on the signature.
Since installing the S1 PCM and then adding the 93 tune there has been a surge issue. Please note this only happens when the 93 tune is installed . Have tried tuning it out, figure it is an airflow/pressure issue, without ...

jimb ..AFR re-calibrated and DV works ...

gizmodo and Duster...did the layout setup and started logging per your suggestion and part way through was prompted to save the layout and log which I did. Ran a second log and all was fine. Logs also downloaded to DV . The work around did the job.

Thanks ...

Done the 1t088aa. Still unable to create new layouts without error messages while recording.
* Stops recording and prompts if I want to save the log

thanks jimb will get back to you on the Trinity stuff but for now ...on the downloads page the croms listed are 1r08 and 1r08a. There isn't any 1r08aa listed on the page I'm viewing.
As you stated ...1ro8a did an auto install.
Hope this works.

...ooops.
Here is the saved AFR log.
* older layout is just plain gone from the layout files.
* should have said the new layouts have error messages on the Trinity
while logging and the data logs will not download into DV. More error
messages.
jimb, just curious, what is the difference between a ...