Thanks!

I keep getting the error 404 when trying to find the latest Crom file for the Predator. The tool has 9R11 and I need the 13. The vehicle needs an update but the tool isn't running the latest crom so it won't do it automatically. Any help as to where I can find the download to get this done? Thanks

It is a CMR tune

Hello, I was wondering if anyone has seen or knows of a cure for this problem. I have a 05 Dodge Ram with a 5.7. It has a mild cam and long tube headers. It is running stock injectors. The truck starts and runs flawlessly. At the track or on the dyno, if you do a hard pull, the afr drops to 12.5 ...

Thanks again Mike!

Can someone tell me where I can get the latest version of dataviewer for Windows 7? When I plug the laptop into the tool and bring up dataviewer, it connects with the tool but it says that there are no PIDs to select. When I plug into the XP computer, it works fine.

Thanks,
Marty

Thanks Johan. I have normalized all the tables that have kPa on an axis to 205 kPa. The VE tables I left alone since in another post you said that you don't increase them or normalize them, the pcm just looks at the 1.0 top line anyway so adjust fueling at the top of the VE table to get the desired ...

Mike, The 3 bar setting put me at 14.14! Thanks! I want to confirm that the only thing that I need to change is under Scalers> Powertrain config>MAP kPa offset and MAP sensor slope. What is the Max MAP difference S-MAP<C-MAP. The stock setting was 40 and another "2 bar" sensor tune had it at 240. I ...

I will give that a try and let you know!

I have been having trouble with the map sensor. I have purchased a SRT-4 2.25 sensor and when I load it with the MAP kPa offset at 4.8 and the slope atr 46.38, with key on and engine off, I get a reading of 10.53. It should be 14.01ish. What do I need to adjust to get the settings correct? I have ...

Can someone give me step by step instructions on how to put these injectors into the tuning file?
The information on the injectors is as follows;
60# per hr @ 43.5 psi = 630cc/min = 453 g/min
Coil Resistance = 12.5 ohms / high impedance
Gain = 0.11ms/mg
Offset = 0.055ms
Turn on time = 1.14ms
Turn ...

would this be the same manual the dealer get??? thanks

FPSeth wrote:I think you need to download the 'DiabloSport CMR Comprehensive Tuning Manual' and read it cover to cover (DCX starts on page 103)

where can i get this manual?? i don't see it in the download section....please thanks..